Welcome to ScubaBoard, an online scuba diving forum community where you can join over 205,000 divers from around the world discussing all things related to Scuba Diving. To gain full access to ScubaBoard (and make this large box go away) you must register for a free account. As a registered member you will be able to:
Participate in over 500 dive topic forums and browse from over 5,500,000 posts.
Communicate privately with other divers from around the world.
Post your own photos or view from well over 100,000 user submitted images.
Gain access to our free classifieds marketplace to buy, sell and trade gear, travel and services.
Use the calendar to organize your events and enroll in other members' events.
All this and much more is available to you absolutely free when you register for an account, so sign up today!
If you have any problems with the registration process or your account login, please contact the ScubaBoard Support Team.
Hello,
I have a regulator that resembles a Dive Rite RG1200 or 1205. I have been trying to figure out who made this regulator since there are many manufacturers with the same design. The HP seat closely resembles a Diverite, however there are a few subtle differences in the reg that I have in hand, and what I see illustrated in the repair manual (black trim ring between body and turret, and groove around the diaphragm cap). I have enclosed a few pictures of the outside and the inside of the regulator, as they should be helpful. Any information you could lend would be appreceiated. I have already heard back from zeagle that it is not theirs, and am waiting on word from Apex.
SEI Diving Instructor #00204, CMAS Instructor #USAF0012000204, TDI Instructor #16810
Owner UDM AQUATIC SERVICES. Now available:SCUBA:A Practical Guide for the New Diver- Print $20 + postage, CD $12.50 + postage, PDf $10 - jimlap212@comcast.net Offering the full line of Edge/HOG gearemail for details.Also now offering products from XS Scuba!
Is there a serial number on it anywhere and if so what direction does it run?
There is a serial number on the reg, however that is not in the same location as I see illustrated in the Dive Rite Repair manual. On the reg I have, the serial number is between the HP ports, opposite the inlet fitting (05020057). Whereas the regulators depicted in the repair manual have what appears to be a serial number between a HP port and the inlet fitting.
LinkBack URL
About LinkBacks
Reply With Quote
Originally Posted by Jim Lapenta
