Reattaching the filler tube to the bladder

[helopilot2be]

I need to reattach the air filler tube to the bladder of a back style bc that I acquired any suggestions?
Thanks
Chris

 

[Teamcasa]

What brand? Did it just come off or did it break? Pictures?

 

[*dave*]

I need to reattach the air filler tube to the bladder of a back style bc that I acquired any suggestions?
Thanks
Chris

I'd get a new bladder. Any repair is not likely to have the integrity of the original, not that the original was all that hot in this case.

 

[helopilot2be]

It is a Zeagle. I dont know the model. I will try to get some pictures. The bladder is clear-ish vinyl. Thanks

 

[helopilot2be]

deleted

 

[Couv]

Yes, a bit more info on the actual type of repair you want to do please.
If you just need to reattach the hose or fitting-that is very simple.
If you have a tear in the bladder, that is a bit more complicated, but no reason not to if the vinyl is in otherwise good shape.



See these threads for a couple of repairs done on vinyl bladders:

http://www.scubaboard.com/forums/2807870-post20.html

http://www.scubaboard.com/forums/4749122-post2.html

EDIT: I see we were posting at the same time, I will wait for your pictures.

Couv

 

[helopilot2be]

I'm trying to post pictures not having any luck yet. There does not appear to be any damage. The fitting is just not attached to the vinyl anymore

 

[helopilot2be]

Ok I can't get the photos to load. But I linked to my photos on here. Thanks for offering to help.

http://www.scubaboard.com/gallery/showphoto.php/photo/139733

 

[helopilot2be]

The fitting will pull right out of the bladder.

 

[micklock]

you can get a bladder flange assembly from Dive Gear Express.