Welcome to ScubaBoard, an online scuba diving forum community where you can join over 205,000 divers from around the world discussing all things related to Scuba Diving. To gain full access to ScubaBoard (and make this large box go away) you must register for a free account. As a registered member you will be able to:
Participate in over 500 dive topic forums and browse from over 5,500,000 posts.
Communicate privately with other divers from around the world.
Post your own photos or view from well over 100,000 user submitted images.
Gain access to our free classifieds marketplace to buy, sell and trade gear, travel and services.
Use the calendar to organize your events and enroll in other members' events.
All this and much more is available to you absolutely free when you register for an account, so sign up today!
If you have any problems with the registration process or your account login, please contact the ScubaBoard Support Team.
Last weekend I did something pretty stupid, and I hope someone can help. I opend up the first stage of my aqualung calypso to make sure the O-rings were intact, gave everything a once over and things looked fine so I put it back together, when I did I noticed two small springs, and did not see where they had come from. It is a piston regulator so I'm thinking they had to come from around the piston moving it in one direction or the other. If anyone can help please let me know.
My first response is that this is an obvious troll, but then again it is just too obvious and easy.
WHY did you take the reg apart?
Do you have the service manual for the reg?
Is this a reg that you dive, or ever expect to dive?
Are you just using this reg as a junker to practice on before working on other regs?
Do you have the Regulator book from airspeed press?
Out of curiousity, I consider myself very technically oriented usually, and I'm not sure how I didn't see where they had come from. I do not have the service manual since it is older, I do expect to dive it hopefully my lds will be able to help. I just figured someone might be able to confirm my suspicion of where they were located.
Usually the hardest part of servicing regulators is getting the manuals and parts. Make friends with a good shop that has a good tech, they will be able to help you more than you know.
There are still plenty of threads all over the web where many of us are looking for manuals & parts for our old Calypso regulators. I'm looking for a manual for my USD Aqua-lung Calypso VI regulator, both 1st & 2nd stages. If someone knows of a shop that has the parts to overhaul these 1st stages please PM me!
I have found a few manuals, yet my 1st stage has the roughly 45 degree angular HP port. I've found 2 "Calypso" manuals online & neither look like mine. They seem to be very similar, yet if I'm going to use this regulator again, I want to be sure she gets a good overhaul 1st!
Anyone know of a place that has the parts & services these?
I bought mine around 1984 & LOVE this reg! I suppose I could replace the 1st stage, yet have no experience with swapping out the 1st stage. Has anyone else done this? If so, which 1st stage? results? (the tech that has mine now suggested this.)
My 1st choice would be to have my 1st stage rebuilt & properly tested (2nd is already being done)
I have some pics of the same 1st stage as mine if that would help.
Tommy
Do not meddle in the affairs of dragons, for you are crunchy and taste good with ketchup.
You're not lost if you don't care where you are - Jim Cooper
You find the best stuff when you're not looking for it - Eduardo Taran
You have the original Calypso (as opposed the Calypso J) you can find the manual here. Download the second one.- aqualung repair manual https://backup.filesanywhere.com/fs/Link.aspx
Bryan has a few parts for the first and second stage.
The HP seat can be flipped and the other side used but I recommend you don't unless you just have to, replacements are hard to find.
LinkBack URL
About LinkBacks
Reply With Quote
