Welcome to ScubaBoard, an online scuba diving forum community where you can join over 100,000 divers from around the world discussing all things related to Scuba Diving. To gain full access to ScubaBoard you must register for a free account.
As a registered member you will be able to:
Participate in over 500 dive topic forums and browse from over 3,000,000 posts.
Communicate privately with other divers from around the world.
Post your own photos or view from 80,000 user submitted images.
Gain access to our free classifieds marketplace to buy, sell and trade gear, travel and services.
Use the calendar to organize your events and enroll in other members' events.
All this and much more is available to you absolutely free when you register for an account, so sign up today!
If you have any problems with the registration process or your account login, please contact the ScubaBoard Support Team.
I can't think of any reason the Fusion would not work with a set of rings that mount in the dry suit wrist seal, as long as the sleeve in the suit is large enough in diameter to let you turn the sleeve inside out and install the ring from the "inside" like you would in any other dry suit.
Well DA, you'd be right, I have a set of Diving Concepts ring style gloves, and that's how we attached them, by turning the sleeve inside out.
__________________
Dive charters around the Long Point tip, and Long Point Bay of Lake Erie, leaving from the Canadian side. www.scubaplus.ca
I agree - but go to the ".../fusion/options" page on the whites site and click on "accessories" and read under "gloves" (site rules won't let me post urls).
snip - Sorry this post seems to have been delayed by the moderator - it would have made more sense in the sequence it was actually posted - snip...
Last edited by giantturtle; September 5th, 2008 at 03:25 PM..
Ok, I've been waiting for someone else to mention them before I said anything.
I have the first Fusion with a set of Factory installed glove rings. They're great!
They do make the suit a 'little' harder to pack, but it's the same as having aftermarket rings.
There is velcro at the base of the glove ring to allow for attaching the outer layer.
My tech instructor ordered a fusion a while back and had learned about my rings - she called them up and asked them to be installed - White's said they don't do that - they only did it once, and the guy she was talking to thought it was a special for the canadian military! (Apparently I've been drafted)
So I suppose they're sending more of them out now, given what was said earlier. Which is probably a good thing - I have't ad any trouble with my rings and have quite a few dives on the suit now. If you get the chance, get the suit with the factory rings, much more elegant and clean looking than aftermarket cuffs.
I can't think of any reason the Fusion would not work with a set of rings that mount in the dry suit wrist seal, as long as the sleeve in the suit is large enough in diameter to let you turn the sleeve inside out and install the ring from the "inside" like you would in any other dry suit.
DA, Is that a certain ring set your talking about? I know for the SI Tech you do not need to turn anything inside out. With the SI you can simply slip the ring in the seal, press the Dry Suit side of the ring over the seal, your done. Takes all of 30 secomds. I can take these on and off as the diving requires, I don't know that I would want to be stuck with permanent DS gloves. It's nice to have the option. Same with the gloves, I can adjust how tight I want the glove in literally seconds. If I am wearing a heavy glove under the DS glove I give a little more room, if it is a light weight one I tighten thme up.
__________________
"Here's the deal, I'm the best there is, when I wake up in the morning I piss excellence" by Ricky Bobbi
Scott
NAUI OW Cert.
TDI Basic Nitrox
Dry Suit Diver
Linear Mode
