Viking classic ring

[marc.collin]

hi

i have Vicking classic ring with the rubber.
i have difficulty to put the glove on and put the o-ring.
are there any technic to put more easier this glove, any video?

thanks

 

[Dive Right In Scuba]

Which glove are you using? Check out this video and glove option:
Pullover Rubber Gloves for Dry Glove System - Dive Right in Scuba

You shouldn't need to use an o-ring, it should stay by itself.

 

[marc.collin]

i saw this video, the guy seem to have a lot of difficulty

some people on the web put a ring, to avoid risk of pop up.


don't know if with the docking ring and spanner ring of sitech, we can do the same thing?

 

[ScubaAl]

I have use the Viking classic rings for well over 20yrs. Never have I had one come off while diving, never. First one goes on easy the second a little more work but very, very do-able.

Al

 

[Dhboner]

I dive with my two sons and one of them always helps with pull my gloves over the rings ;-)

 

[Hawkwood]

If you get the glove down over both ridges, it will not pop off.

If in doubt, a quick couple of wraps with black electrical take does the trick. Honestly, in my experience I have never seen anybody use an o-ring over them.

 

[marc.collin]

i saw then si-tech have a rubber band who can be used
[h=2][/h]does somebody tried to use

with pull over glove?

 

[the_dragon_no1]

Get a set of si-tech quick glove system = always easy + "bulletproof" !

 

[haslamhoff]

If the Viking is similar to the si Tec cuff, I found it easiest to pull the glove on to the cuff on the side closest to my body first. Pinning the mounted side of the cuff against my body to hold that side on the cuff, I then stretched the opposite side over the cuff with my free hand.

I can video this for you with my old suit if it would help.