My Turtle fins fit my old drysuit rock boots perfectly, but are a bit too large for my new DS built-in boots. I tried an XL SP Jet, but it's too small. Is there something thin I can glue into the inside of the Turtles to shrink the opening a bit?
Glue inserts to resize Turtles- How?
- Thread starter Rick Inman
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
bladephotog
Contributor
I used 1/8th inch neoprene rubber and aquaseal to glue into mine. It helped but they still were a bit sloppy. I was using Bare Trek boots though so I changed boots till I found something that would fit in my XL Jets. But the shims stayed in quite well.
*Floater*
Contributor
See this thread: http://thedecostop.com/forums/showthread.php?t=19390
It seems certain rockets might fit, but I don't know if they'd be as good as jets or turtles.
It seems certain rockets might fit, but I don't know if they'd be as good as jets or turtles.
Similar threads
