lawyergrif
Registered
How do I connect the dive computer to the Hollis transmitter?
Hollis DG03 wireless transmitter
- Thread starter lawyergrif
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
fisheater
Contributor
To "sync" the computer and transmitter, you enter the serial number of the transmitter into the computer.
The transmitter serial number is on the transmitter. You can enter it into the computer either via the screen and buttons, or by using your PC and the cable interface.
Sent from my iPad using Tapatalk HD
The transmitter serial number is on the transmitter. You can enter it into the computer either via the screen and buttons, or by using your PC and the cable interface.
Sent from my iPad using Tapatalk HD
The instructions are in the user manual.
Gren
Contributor
DG-03 User Manual http://www.hollisgear.com/pdf/DG03 OM r01.pdf
Yes they do.
Aeris too!
Aeris too!
I just got mine. There is no on or off button on this thing, so how does it activate? Air pressure? Does it consume battery when lying around unused?
P
Edit: Found this for Aeris .. Must be the same...
" Note that the transmitter must be pressurized with a minimum of 300 PSI to activate. Once activated the transmitter will continue to transmit tank pressure every 15 seconds. After 10 minutes of no pressure change the transmitter will automatically shut off. To re-activate the transmitter simply purge or breath from the regulator."
Sent from Tablet, please excuse brevity and typos...
P
Edit: Found this for Aeris .. Must be the same...
" Note that the transmitter must be pressurized with a minimum of 300 PSI to activate. Once activated the transmitter will continue to transmit tank pressure every 15 seconds. After 10 minutes of no pressure change the transmitter will automatically shut off. To re-activate the transmitter simply purge or breath from the regulator."
Sent from Tablet, please excuse brevity and typos...
Similar threads
