Port for Nikon 105mm

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Messages
3
Reaction score
0
Location
Portugal
# of dives
200 - 499
Hi,
Could same one tell me if the Nikon 105mm f/2.8 FX AF Micro-Nikkor operate in the ikelite flat port 5505.58?
If not what´s the indicated port? 5505.5?
Thanks,
Pedro Nunes
KEN_9963-0600.jpg
 
#5505.5 is what Ike's table calls out (Nikon SLR Port Chart). #5505.58 is longer, so the lens will (should) work - just a little over a half inch more air to the port. I've used a #5507 with the lens as it was the port I used back in the film days (Canon F1 w/Vivitar Series 1 90mm lens). I prefer shorter as the 105 w/port is already long and somewhat awkward, especially with a magnifier hanging even further off the front. Opted to go with modular and used and extension stack one step shorter than the table shows.
 

Back
Top Bottom