Nautilus Lifeline v.64 Firmware Update

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Nautilus Explorer

ScubaBoard Business Sponsor
ScubaBoard Business Sponsor
Messages
60
Reaction score
59
Location
Richmond BC
# of dives
I'm a Fish!
FOR IMMEDIATE RELEASE: Nautilus Lifeline v.64 firmware update is available for download at www.nautiluslifeline.com.

v.64 firmware update is available for download at www.nautiluslifeline.com. We now have more than 7000 Lifeline 2-way marine radio and GPS units in the field and have been listening intently to user feedback. We are immensely gratified with reports from many users who have already put their Lifelines to good use in difficult situations. Unfortunately, there have also been several incidents in which units didn't work because the battery charge was low and a couple of incidents when units switched off unexpectedly. This firmware update incorporates the following improvements:

i. Self-diagnostic test. Depress the orange button 3 times to enter self test mode. Position indicating light will test and flash. Battery voltage will be measured to ensure adequate capacity for 30 minutes of talk time and 24 hours emergency distress. Followed by a transmit load test, measurement of internal circuit resistance and a battery voltage droop test. If all parameters are working properly, the self-test will conclude with the message "good to go". Press the orange button once more and you are ready to go diving. NOTE: we highly recommend that before any dive weekend or dive trip, you charge the battery to 100%, inspect the 0-ring and usb port cover to ensure they are perfectly clean and installed correctly, and run the self-diagnostic test..

ii. Manual activation of the position indicating light "strobe". Press the green button twice to manually activate 2 light flashes every 30 seconds to catch the attention of your diveboat. Press any button to turn this feature off. The light will also turn off automatically leaving enough battery reserve for 30 minutes of talk time and 24 hours of distress transmission.

iii. Lifelines shutting off unexpectedly. 3 Lifelines have experienced a power down during normal operation. To ensure your Lifeline is working perfectly, we recommend the following test: Ensure you have updated your firmware to v.64. Turn your unit on. Point the antenna at a metal object and hold the antenna 1/2" away from the object. Metal object can be a cookie sheet, fire extinguisher, fridge or almost anything metal. Depress the green button for 3 seconds. If your unit shuts down, please call or email us right away.

We wish you safe diving and strongly encourage all Lifeline users to ensure that your firmware is up to date with v.64.

Captain Mike and the team at the Nautilus Lifeline.
 
My Lifeline had a problem where I could not run the diagnostic test. This was resolved with this firmware update.

I must admit the service I have had since receiving my Lifeline has been excellent. Email responses have been helpful and quick.

I accept that new products often have glitches, but in this case I have had no reason to complain as the communication has been efficient and honest.

Thanks

Michael
 
Firmware worked fine for me.
 
Hi,

I have a problem since my Lifeline is updated to 0.64 firmware. I'm block with this version. When i want to upgrade to 0.80, the device reboot but no usb drive is detected.

Test with 3 computer, Windows 8.1, 8, 7 and XP. Also boot ths iso image linux with the tools. Look into /var/log/messages, no device detect except the ACM wich communicate with the software.

Nautilus support ask me to drain the battery to 0%. And verify that the LF doesn't power on. Connect to the computer, but it's the same thing.

What can i do ?

Thanks

Best Regards
 
Hi,

I have a problem since my Lifeline is updated to 0.64 firmware. I'm block with this version. When i want to upgrade to 0.80, the device reboot but no usb drive is detected.

Test with 3 computer, Windows 8.1, 8, 7 and XP. Also boot ths iso image linux with the tools. Look into /var/log/messages, no device detect except the ACM wich communicate with the software.

Nautilus support ask me to drain the battery to 0%. And verify that the LF doesn't power on. Connect to the computer, but it's the same thing.

What can i do ?

Thanks

Best Regards

This is a firmware bug associated with firmware version 0.64. Solution can be found here: (Support) Firmware Details v0.76. The most important thing is that after fully draining the battery and connecting to a computer, the Lifeline should show a 50% charge. Any other percentage indicates that the battery was not fully drained. If the 50% charge is displayed, it may still take several attempts to upgrade the firmware. If after several attempts it does not work, please contact our head office at sales@nautiluslifeline.com and we can issue an RMA.
 

Back
Top Bottom