E-PL1 upgrade to E-PM1

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

ggibson

Contributor
Messages
171
Reaction score
40
Location
SF Bay Area
# of dives
25 - 49
Hey guys, quick question for those of you who have upgraded from an original E-PL1 to one the newer Olympus models, even specifically the E-PM1. Is it worthwhile to make the change? What about the controls of the E-PM1 underwater? (better or worse?)

What are the difference in the housings? I noticed a window on the front for the flash on the PT-EP06, but is it possible to shoot with the clip-on flash instead of an external strobe?
 
Hey guys, quick question for those of you who have upgraded from an original E-PL1 to one the newer Olympus models, even specifically the E-PM1. Is it worthwhile to make the change? What about the controls of the E-PM1 underwater? (better or worse?)

What are the difference in the housings? I noticed a window on the front for the flash on the PT-EP06, but is it possible to shoot with the clip-on flash instead of an external strobe?

I have an E-PM1 and have no problem with the controls under water. I don't know if this is an improvement over the E-PL1.
I don't think it will be possible to use the internal strobe. It will fire but the lens port will block most of the light unless you are quite far from the subject and then the light will be insufficient. The window is meant for the fiber-optic connection with an external strobe.
 

Back
Top Bottom