eelnoraa
Contributor
What does it take to convert an Atomic first stage from Yoke to Din? how many parts are needed? What is the approximate cost?
Convert Atomic 1st stage from Yoke to Din, what it costs
- Thread starter eelnoraa
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
Scared Silly
Contributor
$90 is the approximate retail cost of the brass DIN assembly. Simply remove the yoke assembly with a thin walled socket, using an adjustable wrench will slip and mar it. Screw the DIN assembly in with a 3/8" Allen wrench. Torque to 40 in-lbs (IIRC).
The thin walled socket is somewhat of speciality part as a regular socket will not fit over the nut due to the yoke. That said it run $20 from scubatools.com or a 6 pack in trade at a local shop to use theirs.
The thin walled socket is somewhat of speciality part as a regular socket will not fit over the nut due to the yoke. That said it run $20 from scubatools.com or a 6 pack in trade at a local shop to use theirs.
Similar threads
