mike.chuanshi
Contributor
- Messages
- 105
- Reaction score
- 26
For those of you who have a Dive Rite XT first stage regulator with a DIN-to-Yoke adapter, how have you configured your setup to reduce the amount of bulk behind your head?
Dive Rite XT Advanced Open Water - First Stage Configuration
- Thread starter mike.chuanshi
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
Not much you can do.....
Set it up with the tank the "wrong way round".
Mount the tank upside down.
Side mount.
.....or
convert back to INT.
use a DIN tank.
Set it up with the tank the "wrong way round".
Mount the tank upside down.
Side mount.
.....or
convert back to INT.
use a DIN tank.
get a BP/W.... 
... Okay, that was supposed to be funny.... Then again, are you diving one? Using a STA on a BP/W would move the tank further off your back, creating a bit more potential room....
okay, Fishpie had the answers........
... Okay, that was supposed to be funny.... Then again, are you diving one? Using a STA on a BP/W would move the tank further off your back, creating a bit more potential room....okay, Fishpie had the answers........
Similar threads
