Identifying regulator

[jprednik]

Hi

please help me identify this old reg i came acros from "garbage"

I belive it should be ScubaPRO MK3 (edit i did mean 5) dont know wich revision but the cap on it is missleading me saying SeemanSub. Then again they are related are they not=?

Thinking to have it as learning toy asembling and disasembling reg,..
Will look for SCHEMATIC WORKSHEETS once sure what it is

Thx

 

[redacted]

It is a Mk5 with a 5 LP port turret and a 200 bar din connector. Quite a find and perfectly usable today. Very straight forward balanced piston design. Uses standard o-rings and the same HP seats as a Mk10 (as well as other brands) so you should be able to find support for quite some time. A great BP 1st stage to get your feet wet in DIY. Be careful not to damage the sealing surface of the HP piston o-ring. It is not easy to dig out and replace. I believe VDH has service kits.

 

[agilis]

Looks like a Scubapro Mk5 to me.

 

[diversteve]

Will look for SCHEMATIC WORKSHEETS once sure what it is

Look here: https://divestock.com/files/regulator-manuals/

There's even a Seamann Sub manual there who were probably the reseller originally.

 

[rhwestfall]

and DIN no less...... nice find!