connector, flex arm, adapter

[marc.collin]

hi

i buy this base (Intova BTD Base Tray Flash Strobe Handle ARM AND Tray SET FOR Underwater Lights | eBay)



i connected my canon wp-dc42 to it.

for the light, i have an Archon D11V

i have this kind of support for the light


is there any adaptor to connect this support to the base?

thanks

 

[diversteve]

You need a ball arm adapter on the tray end and a clamp. My assumption is your Archon Adapter is 1" - that's pretty standard. Some of the ball ends are 3/4" though also so measure it before buying.

90 Degree Ball Joint Adapter with T-base Slot BJADAPTER.TBASE90
and:
Ball Joint Clamp - fits all standard 1" balls BJCLAMP.DOUBLE

Add an arm and second clamp for more flexibility in positioning if desired. More than doubles the price though.
8" Ball Joint Arm with 1" Balls BJARM8

Big Blue also sells a slightly less expensive arm: Bigblue Aluminum Double Ball-Joint Arm Section ARM08 B&H Photo

B&H sells the Nocturnal line also - and ships internationally if you can't find a dealer nearby: Arms & Accessories | B&H Photo Video

Don't take what I post as fact, verify all this info with the mfr's/dealers - I'm not an expert in this stuff.