DIN valve with yoke reg

[plsdiver4377]

Question: Is it possible to get an adapter to use a yoke reg (Dacor Eagle Pro DPD) with a Faber HP100 DIN valve tank?

Thanks

 

[Pez de Diablo]

You bet! An easy solution is at this link

Din valve adapter to yoke

 

[Scubaroo]

A HP100 tank has a 300 bar DIN valve - those OMS (and similar) adapters only work in 200 bar DIN valves. The extra length (front to back) of the 300 bar valve would probably prevent the yoke fitting over it anyway. Not to mention whether the yoke itself on the regulator is rated to 3500psi.

 

[Dryglove]

plsdiver4377 once bubbled...
Question: Is it possible to get an adapter to use a yoke reg (Dacor Eagle Pro DPD) with a Faber HP100 DIN valve tank?

Thanks

Nope....if its a high pressure tank its gonna have a 300bar valve.If it was a standard or low pressure tank with a 200 bar valve you could get an insert that threads into the valve to adapt your yoke to like in the picture in the above link.So basically you need to convert your reg over to a 300 bar version if you want to use a high pressure tank.

 

[plsdiver4377]

Thanks I appreciate it.

 

[Pez de Diablo]

Drat, sorry for the misinformation