Welcome to ScubaBoard, an online scuba diving forum community where you can join over 205,000 divers diving from around the world. If the topic is related to scuba diving, this is the place to find divers talking about it. To gain full access to ScubaBoard (and make this large box go away) you must register for a free account. As a registered member you will be able to:
Participate in over 500 dive topic forums and browse from over 5,500,000 posts.
Communicate privately with other divers from around the world.
Post your own photos or view from well over 100,000 user submitted images.
Gain access to our free classifieds marketplace to buy, sell and trade gear, travel and services.
Use the calendar to organize your events and enroll in other members' events.
Find a dive buddy or communicate directly with scuba equipment manufacturers.
All this and much more is available to you absolutely free when you register for an account, so sign up today!
If you have any problems with the registration process or your account login, please contact the ScubaBoard Support Team.
I am starting to dive BPW and, among other things, I want to go the Hogarthian continuous webbing route. I was somewhat bemused to discover that harnesses in South Africa retail in the US$200 range.
If I was to buy high-quality scuba webbing, good solid d-rings with retainers and the appropriate buckle it would cost me about US$80. Is there some kind of catch that I am missing to simply assemble it myself and thread it to a BP? Is there anything I should be concerned about or issues that would make the DIY approach sub-optimal?
Nope, none whatsoever. As long as you buy the right amount the first time and trim it conservatively. No reason to spend $200 on a hogarthian harness. Heck I could send you a harness set up from the US for $80.00 plus shipping and I bet it would not be much over $100 total. Would have to.check the shipping rates with an address to be sure of an exact price.
I prefer to make my own... much cheaper and you can actually do a nicer job than many 'off-the-shelf' hog harness.
I get some soft webbing (choice of colors... my last was yellow).. which is nicer for me, because I dive often in a rash guard. Also, I opt for low-profile d-rings at the shoulders and waist - just a personal preference, but a little more slick (if you don't wear heavy gloves).
Harness webbing... a couple $'s a meter.
Metalwork... $20-40 max.
Paying/charging $200 for a hog harness is absurd....
I got up my first backplate and harness, unassembled, in parts, it took some time "figure it out". As I was getting it together, I had time to think about what works and does not with that setup. It took a long time the first time, but It made me appreciate the simplicity and elegance of the kit a lot more.
The simplest harness works best for me after all those years.
In short, go for it. I think you will actually get a better piece of kit that way. A very true way of doing things.
I've never bothered to put a grommet in it. I use toothed tri-glides to secure the harness at all four corners - the ones on the shoulders take any strain/movement out of the harness and prevent it fraying/damaging the hole for the bolt. I've been using one DIY harness for over 10 years now.. it was very stiff webbing when it started - considerably softer now.... but zero fraying around the bolt.
+1 for Halcyon webbing, although all the rest of my harness is bits I've taken off previous rigs...
Andy - do you get a lot of fraying around where the top bolt goes through the webbing? Or do you have a thing for putting grommets in?
I also like the Halcyon webbing, very good combo of stiffness/comfort. For grommet installation, Coleman makes a small kit including punch and brass grommets. It takes a fair amount of effort (hammering through the webbing) but far cheaper than the industrial machine at around $10.
Deco
PADI MSDT #209304 TDI/SDI #15666 UTD #pending
"you can have my spare air when you pry it from my cold dead hands....."
I find it fascinating that more men have walked on the moon than have seen the ocean below 800 feet. }<)))>}<)))>}<)))>
DIY of course.
Bought a measured length of weight belt as well as a shorter one for the crotch strap.
Used a red hot solder iron to puncture a hole on the belt.
Bought a brass grommet from a hard-ware store and hammered it in.
Also used retainers(4) to secure the harness on the four corners.
5-6 D-rings + retainers + metal buckle.
I am starting to dive BPW and, among other things, I want to go the Hogarthian continuous webbing route. I was somewhat bemused to discover that harnesses in South Africa retail in the US$200 range.
If I was to buy high-quality scuba webbing, good solid d-rings with retainers and the appropriate buckle it would cost me about US$80. Is there some kind of catch that I am missing to simply assemble it myself and thread it to a BP? Is there anything I should be concerned about or issues that would make the DIY approach sub-optimal?
3Likes
LinkBack URL
About LinkBacks
Reply With Quote
Originally Posted by GrimSleeper
