I am interested to hear some opinions about a configuration I think of, adjusted to minimise risks during solo dives. I am mostly interested on comments about hose connection to mask.
I use 2 tanks, sidemount, going from 2x4 liters to 2x12, depending on conditions
Left tank: apeks ds4 1st stage, one hp 15cm hose to pressure gauge, one lp hose to wing inflator, one lp hose with quick release to main regulator of a ffm, ocean reef
Right tank: apeks ds4 1st stage, one hp 15cm hose to pressure gauge, one lp hose to drysuit inflator, one lp hose to an apeks octopus connected to the secondary port of ffm (where usually is installed surface valve).
Both main regulator and octopus has adjustments, so I can balance from there which tank I am using.
Thank you.
I use 2 tanks, sidemount, going from 2x4 liters to 2x12, depending on conditions
Left tank: apeks ds4 1st stage, one hp 15cm hose to pressure gauge, one lp hose to wing inflator, one lp hose with quick release to main regulator of a ffm, ocean reef
Right tank: apeks ds4 1st stage, one hp 15cm hose to pressure gauge, one lp hose to drysuit inflator, one lp hose to an apeks octopus connected to the secondary port of ffm (where usually is installed surface valve).
Both main regulator and octopus has adjustments, so I can balance from there which tank I am using.
Thank you.