Scubapro Parts I.D Help

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Bryan@Vintage Double Hose

Contributor
Scuba Instructor
Messages
688
Reaction score
928
Location
Wesley Chapel Florida
I got a lot of parts in trade and I want to be sure I identify them all correctly before I put them in the website store.

Part #1
20180808_081357.jpg

Part # 2
20180808_081720.jpg
 
Picture #1 looks a lot like an old Dacor seat and HP spring. To know which model it applies to, I'd need shaft length and whether or not there's an internal bore in the seat shaft. There were three different seat mods to the Dacor 900 series, as I recall. I'll get out my manuals if you have dimensions.

Picture #2 is a D-series poppet stem, PN 11-012-106, with seat oring 01-050-399. You'll also need an equivalent for the bottom o-ring 01-050-323. I can find those measurements, if you'd like.
 
I guessed DACOR as well but all these parts came from someone who retired from S-Pro. That's where I was confused!
 
Lol, it's stump the dummy time!
Part #3 - Mk 10+/Mk 25 HP seats. I'll take ten, thank you! PN 10-101-161. PM me.
Part #4 I just don't know. Depending upon whether it fits in a Mk 5 or Mk 10 seat carrier, it could be an aftermarket cone seat. On the other hand, it also looks very much like some Oceanic and Dacor seats I've used. Measurements? That's not a "J" on the back of the seat, is it? Cant quite tell. If so, it's a new Atomic Jet seat.
Part #5, I recognize but can't place. @herman ? Yes, it's Scubapro, but I can't recall where I saw the bumps. M50, I believe.
 
Robert, you know my E-mail if you are interested in taking all 14 of the seats I have.
Part 4 has a number on the bag 10-600-123 if that helps.
Part 5 diaphragm has P/N 11-250-1xx on it. Couv was thinking it would fit several regulators.
 
e-mail on the way!
Lol, you've sucked me in! If you'd posted the whole list of pics, I'd probably have let @couv handle it all.
I'll check on that seat part number. Stand by.
Part #6 is a modified Mk20/25 piston shaft ring PN 10-700-107 replaced by -105. The slit was an attempt to decrease the incidence of high frequency whine. Nobody uses them any more.
Part #7 is a spring centering washer for a Mk10+, PN 10-500-118
Part #8 is the TIB Piston bushing for the Mk10+, PN 10-500-114
 
I'm going to let Robert play deep sea detective with the huge lot of parts and then get them in the website store. At least I was able to get some balanced adjustable conversions back in stock!
 
But gentleman that he is, he offered me $12,500 for the detective work.
Hard as it will be, how could I turn him down?
 
https://www.shearwater.com/products/peregrine/

Back
Top Bottom