Zebra Mussels and Gear

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Dubious

Contributor
Messages
344
Reaction score
254
Location
Wisconsin
Greetings,

Quick question. My wife and I dived a lake with the invasive Zebra mussels. I know boats are to take extra care but what about us divers? We rinse our gear after every dive. We sometimes just hang the gear and rinse off with hose while other times we fill our dive bin with water. Is that enough? What about the wing? We normally just let the water out, but should we do more? We want to make sure we are doing our part.

Thanks.
 
The Great Lakes, plus the quarries I dive, have the mussels. I don't worry about it. Friends do a lot of Great Lakes diving, too, and I haven't heard anyone raise this concern. We're mostly of the "we dive freshwater so we don't rinse much" mentality. Pretty much only time I rinse my gear is when it's got gravel from the quarry on it.
 
To answer your question. The zebra mussel larvae can live up to two weeks in a warm, dark, moist environment. Sound like the inside of your BCD? So yes.
 
Will your gear have a chance to completely dry?

We dive about once per week, so yes.

The Great Lakes, plus the quarries I dive, have the mussels. I don't worry about it.

Not all of our lakes and quarries have them yet. I don’t recall seeing any at pearl lake in south Beloit either.

The zebra mussel larvae can live up to two weeks in a warm, dark, moist environment.

Wow that long! Should I disassemble the the wing to rinse it out well and get as much water out as I can?
 
Greetings,

Quick question. My wife and I dived a lake with the invasive Zebra mussels. I know boats are to take extra care but what about us divers? We rinse our gear after every dive. We sometimes just hang the gear and rinse off with hose while other times we fill our dive bin with water. Is that enough? What about the wing? We normally just let the water out, but should we do more? We want to make sure we are doing our part. Thanks.

Mussel infestations threaten Colorado reservoirs
Invasive Mussels | Bureau of Reclamation

My opinion? Probably not good enough.

Problem in Colorado.

I made several dives in Lake MIchigan last year. It had been about 40 years since my last cold water dives - and it wasn’t any warmer. Cold! But the water was surprisingly clear. Blue on the surface - full sun, no clouds - and a dull green below. But, you could see.

What’s next for Lake Michigan? The Asian Carp? What happened to my LM perch?
 
The Great Lakes, plus the quarries I dive, have the mussels. I don't worry about it. Friends do a lot of Great Lakes diving, too, and I haven't heard anyone raise this concern. We're mostly of the "we dive freshwater so we don't rinse much" mentality. Pretty much only time I rinse my gear is when it's got gravel from the quarry on it.

Lake Michigan has become dramatically clearer in last 20 years — but at a steep cost

The damage has long since been done to Lake Michigan’s fishery. Divers had nothing to do with the introduction of filter feeders to Lake Michigan, but the economic impact - the loss of fishing dollars - dwarfs the minuscule economic impact of scuba LM dollars.
 
Wow that long! Should I disassemble the the wing to rinse it out well and get as much water out as I can?

I would. Use hot hot soapy water. Anything you can do to protect the other bodies of water around you is a good thing. Realistically doesn't add that much time either and wont hurt your gear to get a good clean
 
  • Like
Reactions: Ana
I do volunteer diving at Spring Lake (the old Aquarena Springs) at San Marcos, TX. It is a highly protected habitat, and prior to diving there, we must submerge our gear for 20 minutes in a 20% vinegar/80% water solution if the gear will not be damaged in the vinegar solution. Exceptions being if the previous dive using the same equipment was in Spring Lake, or a chlorinated pool, or a salt water environment. They also did not seem concerned about cleaning the dive gear if not used for a couple of weeks. When I occasionally dive in our recently zebra mussel contaminated lake where I live, I just stop at the local pool on the way home, give the gear a good soaking, letting chlorinated water into the bladder, and then rinse with fresh water when I get home. There is no mention or guidance about using hot soapy water in the Meadows Spring Lake Dive Authorization Course materials.
 
letting chlorinated water into the bladder, and then rinse with fresh water when I get home.

Thanks. Do you think our salt water hot tub would suffice which has 3ish ppm of chlorine? I might even be able to fill the bladder from our well water filtration system. We have a chlorinated reaction tank with a valve after to check for free chlorine which we keep at 1ppm.

I do volunteer diving at Spring Lake (the old Aquarena Springs) at San Marcos, TX

This seems like a very interesting place to dive. I might have to read more about this site. $230 for the class is high but sounds like they provide a lot of great instruction.
 
https://www.shearwater.com/products/teric/

Back
Top Bottom