PLBs Can Save Your Life

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Brb, replacing the o-ring ever year or so is a good idea, and I hope that someone comes up with a good US source. I bought a couple from Hdvseatvek, shipped from Australia, for $12. More important is regreasing the o-ring. Mine leaked a little the first day on my last trip, no harm but not something you’d want to happen every day. I added a little silicone grease which fixed that for the rest of the week. I do open and check daily, good idea for any canister.

JD, I think you just want it snug as well as greased with silicone grease. Check daily as to ease of opening and leaked.

O-rings themselves are super inexpensive (pennies!) so once we have the size, material, and durometer. I'm hoping he will share the info but if not I suppose $12 for a few isn't bad if you only have to replace it yearly... I did notice that it came with A LOT of grease on the o-ring already, more so than anything I would ever put on anything else I have (lights, strobes, camera). I will report back on the functionality after diving with it compressed and tight...I have 83 dives scheduled on a trip that I am leaving on next week so it will be plenty of time to test it, use it, and provide some real feedback short of activating the PLB itself.

I think opening it to check it every day is probably a good idea. Thanks for the suggestion.
 
I'm hoping he will share the info but if not I suppose $12 for a few isn't bad if you only have to replace it yearly
I agree. We do need to get the info on the o-rings and just buy them here.

I will report back on the functionality after diving with it compressed and tight
I would not tighten it more than snug.
 
. . .
I think opening it to check it every day is probably a good idea. Thanks for the suggestion.

I have a different canister, the no-longer-produced McMurdo, but my thinking has been the opposite: do not open it often because each time the friction (though presumably lessened by silicone lube) stresses the o-rings and provides an opportunity for contaminants (e.g., dust, a hair, a grain of sand) to stick to the silicone lube.
 
no-longer-produced McMurdo
I rented one of those once years ago. Heavy! I was glad to find my nylon canister.

do not open it often because each time the friction (though presumably lessened by silicone lube) stresses the o-rings and provides an opportunity for contaminants (e.g., dust, a hair, a grain of sand) to stick to the silicone lube.
There's truth there, but how often do you open your camera housing? Caution & care indicated.
 
but my thinking has been the opposite: do not open it often because each time the friction (though presumably lessened by silicone lube) stresses the o-rings and provides an opportunity for contaminants (e.g., dust, a hair, a grain of sand) to stick to the silicone lube.

There's truth there, but how often do you open your camera housing? Caution & care indicated.

I can see the logic for both. Hmm.....
 
I think opening it to check it every day is probably a good idea. Thanks for the suggestion.

I believe of “don’t fix if it ain’t broke”. That’s why I have a clear case & some of the UW camera cases too. All I need to do is to pull it out of my BCD pocket and see if water/ moisture gets into it. I do clean the seal surfaces and silicon grease the o-ring before putting the PLB1 in it.
 
I believe of “don’t fix if it ain’t broke”. That’s why I have a clear case & some of the UW camera cases too. All I need to do is to pull it out of my BCD pocket and see if water/ moisture gets into it. I do clean the seal surfaces and silicon grease the o-ring before putting the PLB1 in it.
That is one of the nice things about the UK lights, they have a clear acrylic dome top. Just invert and look.
 
https://www.shearwater.com/products/teric/

Back
Top Bottom