Best Buoyancy Solutions For Underwater Cameras

[BackscatterUW]

BackscatterUW A new article has been posted

Best Buoyancy Solutions For Underwater Cameras

Continue reading the Original Article.

 

[Pillpusher]

Funny that this article just popped up. A couple days ago, I ordered some 1 1/2' ID, 3/4" thick pipe insulation to slide over the arms. I just have no idea how much I'll need for proper weighting. I have a G7xii and use the SeaLife flex arms, so most standard float systems that I'm aware of don't fit.

 

[fisheater]

Funny that this article just popped up. A couple days ago, I ordered some 1 1/2' ID, 3/4" thick pipe insulation to slide over the arms. I just have no idea how much I'll need for proper weighting. I have a G7xii and use the SeaLife flex arms, so most standard float systems that I'm aware of don't fit.

How will that pipe insulation stand up to pressure at depth?

 

[tursiops]

Funny that this article just popped up. A couple days ago, I ordered some 1 1/2' ID, 3/4" thick pipe insulation to slide over the arms. I just have no idea how much I'll need for proper weighting. I have a G7xii and use the SeaLife flex arms, so most standard float systems that I'm aware of don't fit.

That will work for only a few feet...maybe 10-15. Then the foam crushes and you lose buoyancy.
Do a little thread searching on SB. Many have found that cut-up solid fishing floats work pretty well and are cheap.

 

[Pillpusher]

That will work for only a few feet...maybe 10-15. Then the foam crushes and you lose buoyancy.
Do a little thread searching on SB. Many have found that cut-up solid fishing floats work pretty well and are cheap.

Well crap.... Hadn't thought of that. I'm not sure what you mean by solid fishing floats, though. The other two things I considered trying to wrap around them are these:

Stix - FB-AQ Float Belt for Nauticam/Aquatica

Or

https://smile.amazon.com/gp/product/B00CMKOQ56/ref=ox_sc_saved_title_1?smid=AMX7AP8KFUEIH&psc=1

 

[D_Fresh]

Well crap.... Hadn't thought of that. I'm not sure what you mean by solid fishing floats, though. The other two things I considered trying to wrap around them are these:

Stix - FB-AQ Float Belt for Nauticam/Aquatica

Or

https://smile.amazon.com/gp/product/B00CMKOQ56/ref=ox_sc_saved_title_1?smid=AMX7AP8KFUEIH&psc=1

The Stix, while a bit expensive, are the right tool for the job. They will stand up to depth, and can be trimmed to dial in the buoyancy you desire for your cam.

The second link, the camera float, has 2 issues.... First, it's designed to float the camera at the surface, and will likely be a PITA to get down underwater upon descent, and secondly, they're likely made of a softer foam which also compress at depth, negating their buoyancy....

There's another option, DIVINYCELL pvc foam. It's a rigid foam which can be cut to shape, and apparently does well for DIY camera floats.

See this thread here: Strobe Buoyancy Arms (Foam?)

 

[tursiops]

I'm not sure what you mean by solid fishing floats, though.

PVC Sponge Floats
People says these work, and be cut/drilled to fit your rig.
I have no experience with them.

 

[chris kippax]

I use STIX and they work as intended and last for a long time.
Buy it nice or buy it twice is my motto for photography. Don't ask me how I came to that conclusion.

Below is what I use in Macro mode, I lose the collar for WA mode
8 x Jumbo floats in WA mode
8 x Jumbo floats and a collar in Macro mode

 

[Pillpusher]

Thanks. I went ahead and ordered a Stix belt. I figure I can use 5 on each side and zip tie them to the arms.

 

[CanadaDan]

Another disadvantage of the fixed float arms is they tend to be less robust than standard girder arms. My first rigging had the float arms first off the grips and I had the carry lanyard attached to the ball posts. This lasted less than one dive week as the posts stripped their threads and pulled out of the float. I've reversed the arms so the girders come first and it's held up ever since.

Important to note that Seafrog, the seller of these particular arms, stood firmly behind their product despite my abuse and replaced them quickly and free of charge.