• Welcome to ScubaBoard


  1. Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

    Benefits of registering include

    • Ability to post and comment on topics and discussions.
    • A Free photo gallery to share your dive photos with the world.
    • You can make this box go away

    Joining is quick and easy. Login or Register now by clicking on the button

Ikelite Staff
Last Activity:
Sep 5, 2018
Joined:
Sep 12, 2007
Messages:
863
Likes Received:
21
Trophy Points:
18

Share This Page

Ikelite Staff

Dive Equipment Manufacturer, from Indianapolis, IN, USA

Ikelite Staff was last seen:
Sep 5, 2018
    1. DaddyJr
      DaddyJr
      Hello, following a thread I started in the Sony Snappers section of this forum, I was directed to you: -

      Can you confirm if the Ikelite casing for the Sony HX50 compact camera can also be used for the HX60V?
    2. IceIce
      IceIce
      Hi, we've been using ikelite housing for Nikon D300 and Nikon D90. So far, everything has been okay.

      We notice that our housing buttons are not very smooth so we decided to buy the spare part yesterday from ikelite distributor here in Singapore.We had tips about how to clean up the buttons and replace the spare parts. They suggested us to use alcohol.

      doing the clean up we notice what seems like cracks in the housings. Along the edge and basically all the buttons have the very visible cracks. Upon researching the internet, we found pieces of information here and there that alcohol should not come in contact with arcrylic.

      How is this going to effect the waterproof capability of the housing?
      It's very upsetting to us to get this fatal mistake from the distributor itself.
      We are in contact with hin and will bring the housing later today but i don't know wht solutions do we have.

      Do you have any advice or input to share?

      Thanks in advance.
    3. tascha007
      tascha007
      Hi,

      I bought an Ikelite housing for Canon 7D with #5503 standard 6" dome port. I am using Tokina 10-17mm lens. Can you please let me know which other lenses can fit in this port?
    4. l_eau_hic
      l_eau_hic
      Hello,

      i 'm French and i have bought a ikelite housing ( # 6038.93 ) for the DCR SR 210 E ( sony ) .

      I have loose my lens shade and i would like to find another lens shade, but don't know where .
      Can you help me please ?

      Loïc
  • Loading...
  • Loading...
  • About

    Location:
    Indianapolis, IN, USA
    Gender:
    Not specified
    Rebreather Experience:
    Manufacturer of Flashlights and Underwater Photography Equipment Since 1962