DI_Guy
Contributor
Here is more information on the available gear ( many of you have asked ) ...
- two dive lights - C8 type ( 8 C Cells ) and a small back-up - six AA cells )
- brand new "tank strap" - ( for securing your tank to your BCD )
- IP pressure gauge 0-300 PSI, ( for measuring intermediate pressure at LP hose )
- Omersub emergency dive sausage,
- Mares Dive Computer MC1-rgbm (air & nitrox) with compass and SPG in console,
- IRIS computer Interface for Mares MC1-rgbm ( dive computer to PC via infrared link )
- two dive flags - 20" x 17" and 24" x 20"
- diver below flag/float (inflatable type with 70' reel )
- lead weight belt ( with 16 lbs of coated lead weights )
- Mini-Hammer Dive Alert ( under-water horn - attaches to LP hose )
- mens Kevlar dive gloves (whites) (size XXL 11/12)
- ScubaPro R190 Octo & Scubapro G250HP Reg. & ScubaPro MK18 1st Stage
- Mares Vector 1000 MRS BCD ( men's large to XL ) with 2 removable weight pouches
- OCS Emergency "line cutter" (titanium)
- Gear retractor
- Tank protector (mesh type)
- two AL 80 tanks ( air ) with boots and mesh tank protector (yoke type)
- two AL 80 tanks ( nitrox ) with boots and mesh tank protector (yoke type)
- ScubaPro Gear Bag - large ( mesh type ) ( 3' long - 16" diameter )
- two small LED strobe lights ( GLO-TUBES ) (One red)(One white)
- HP Tank Pressure Gauge ( 0 - 5000 PSI - Yoke Type ) ( for checking tank pressure )
- mens 7mm dive suit with attached hood (BARE) size (I am 6' tall @ 200 lbs)
- mens dive boots ( BARE ) size 10
- LED Dive light with flexible ambilical cord to power canister (Greenforce) Flexi FunStar
( this LED dive light is very bright but uses little power - can be used as a hand held or as a remote with canister clipped to BCD and LED lamp head on hand grip)
- tank carrier Straps ( x2 )
You can email me at aparktcl@hotmail.com and I will send photos of them.
All equipment was treated with utmost care and I hope it all finds a good home.
Al
- two dive lights - C8 type ( 8 C Cells ) and a small back-up - six AA cells )
- brand new "tank strap" - ( for securing your tank to your BCD )
- IP pressure gauge 0-300 PSI, ( for measuring intermediate pressure at LP hose )
- Omersub emergency dive sausage,
- Mares Dive Computer MC1-rgbm (air & nitrox) with compass and SPG in console,
- IRIS computer Interface for Mares MC1-rgbm ( dive computer to PC via infrared link )
- two dive flags - 20" x 17" and 24" x 20"
- diver below flag/float (inflatable type with 70' reel )
- lead weight belt ( with 16 lbs of coated lead weights )
- Mini-Hammer Dive Alert ( under-water horn - attaches to LP hose )
- mens Kevlar dive gloves (whites) (size XXL 11/12)
- ScubaPro R190 Octo & Scubapro G250HP Reg. & ScubaPro MK18 1st Stage
- Mares Vector 1000 MRS BCD ( men's large to XL ) with 2 removable weight pouches
- OCS Emergency "line cutter" (titanium)
- Gear retractor
- Tank protector (mesh type)
- two AL 80 tanks ( air ) with boots and mesh tank protector (yoke type)
- two AL 80 tanks ( nitrox ) with boots and mesh tank protector (yoke type)
- ScubaPro Gear Bag - large ( mesh type ) ( 3' long - 16" diameter )
- two small LED strobe lights ( GLO-TUBES ) (One red)(One white)
- HP Tank Pressure Gauge ( 0 - 5000 PSI - Yoke Type ) ( for checking tank pressure )
- mens 7mm dive suit with attached hood (BARE) size (I am 6' tall @ 200 lbs)
- mens dive boots ( BARE ) size 10
- LED Dive light with flexible ambilical cord to power canister (Greenforce) Flexi FunStar
( this LED dive light is very bright but uses little power - can be used as a hand held or as a remote with canister clipped to BCD and LED lamp head on hand grip)
- tank carrier Straps ( x2 )
You can email me at aparktcl@hotmail.com and I will send photos of them.
All equipment was treated with utmost care and I hope it all finds a good home.
Al
