Is it necessary to clean the Neptune lens before using like you do with a regular mask, i.e. soft scrub, etc. Also, what is the best hood for a good seal? Thanks-
Last edited:
Lens Cleaning
- Thread starter DM95
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
MSltr
Contributor
I'm not sure if it the best hood, but I use SeaSoft C3/Pro Hood. Designed for full face mask.
SeaSoft Scuba Products
SeaSoft Scuba Products
Shftrdog
Contributor
Yes you should clean it like a regular mask
OP
Thanks for the feed back - much appreciated
Sealdl
Registered
The lens should be cleaned if it is dirty. It is not cleaned to prevent fogging. The mask is designed so it does not fog so if it is fogging during a dive that is a warning that you are having a CO2 buildup and you need to abort the dive.
Ffm mask lenses should clear them self only clean if dirty
and I use a normal hood I just cut the opening larger so
the ffm contacts the face it the easiest way there not mmany hoods
out there that seal well
....
and I use a normal hood I just cut the opening larger so
the ffm contacts the face it the easiest way there not mmany hoods
out there that seal well
....Similar threads
