Sola Tech 600

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Thor22

Registered
Messages
5
Reaction score
1
Location
New Jersey
# of dives
1000 - 2499
What's the depth rating on the Tech 600? I know the Sola 800 and 1200 are 270', just curious if the Tech is rated deeper? Thanks!
 
What's the depth rating on the Tech 600? I know the Sola 800 and 1200 are 270', just curious if the Tech is rated deeper? Thanks!

90m/295ft... per DRIS website anyway.
 
Just received new tech 600...when connected to charge the light itself flashes and the charger alternates between a red/orange light to a green light. The indicator lights on the unit itself started flashing red as the manual indicated for a low/dead battery and eventually did turn to solid green (full charge). When attempting to turn the light on, it will not turn on by sliding the slider either up or down and letting go...when I do that the first green light illuminates and when I let go all three lights flash red. If I slide and hold the slider the light will stay on until the slider is released or until the 4 second lock out goes into effect. Is there a trick I'm missing or is this a defective light that needs to be returned?? Thanks so much!
 
Just received new tech 600...when connected to charge the light itself flashes and the charger alternates between a red/orange light to a green light. The indicator lights on the unit itself started flashing red as the manual indicated for a low/dead battery and eventually did turn to solid green (full charge). When attempting to turn the light on, it will not turn on by sliding the slider either up or down and letting go...when I do that the first green light illuminates and when I let go all three lights flash red. If I slide and hold the slider the light will stay on until the slider is released or until the 4 second lock out goes into effect. Is there a trick I'm missing or is this a defective light that needs to be returned?? Thanks so much!


Mine me did that same thing the motherboard basically stopped working and needed to be replaced sent if for a replacement and light and motion repaired light.
 
https://www.shearwater.com/products/peregrine/

Back
Top Bottom