Prices per dive.

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

I just edited a few things to make it a bit less clunky, but here is the excel file for anyone curious to play with it. Prices are obviously unlikely to align with where you are, and the depths are for FFW, but the calculations are obviously in ATA, so the couple feet to adjust to FSW shouldn't matter

Good job! Thanks for sharing!
 
@Meivi the variables for what tanks were used, what mixes were in there, what our individual consumption rates are, and how much we paid for gas are unfortunately too vast to try to list. The pdf and excel chart that I posted provide much more reasonable data that is more useful to gas planning.

for example, the list that we will have here is all with imperial tanks and units. $/cubic ft, cubic ft/minute consumption, $/lb
With the excel file, you can easily go in and change the price/cf or $/lb over to Krona/liter or Krona/kg and then change the consumption rate from CFM to LPM and allow you to calculate costs on your own.

Part of why it is important to do the math on your own vs. having us tell you what our costs are is the variables are VERY wide. For example, the chart I posted was using gas costs from Amigos Dive Center IIRC. If You go to Pompano Dive Center on the coast of Florida, Helium goes from $0.85/cf up to $1.15/cf and the cost/cf of 15/55 goes from $.52/cf up to $.9/cf. That makes the trimix dive almost 2x as expensive from Pompano as it is from Amigos and they are only a 5 hour drive away in the same state.

To calculate for specific dives though, you are best off using your planning software that should spit back and estimated number of cubic ft or liters consumed of each gas type and then calculate that against the cost of gas to give a better estimate of the costs for your specific dive.
 
I don't want my wife to know...
 
After diving for a few years, I would not do this. If you are diving to the depths that you need trimix on a regular basis, then a rebreather makes sense. If not, OC makes sense. Either way, it's gonna cost you.
 
Rough figures i did a 210ft dive last year. Lp104s with 18/45 al40s of 50/10 and oxygen 200 at a local shop. Boat ride 180. Travel expenses etc. Visiting the largest schooner built in Canada for 20 min priceless. Dont think about it to much. Takes the fun out it.
 
http://cavediveflorida.com/Rum_House.htm

Back
Top Bottom