Drysuit inflation system

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

are you doing OC trimix? if doing it in OW and not squeezing through stuff, it may be easier to strap to one of your primary bottles than to try and butt mount it. The 13's are big, use your can light dimensions for relativity or go to home depot and get a short section of PVC pipe. 3" schedule 40 at 14" long will roughly simulate a 6cf w/ valve, and 4" sch40 at 16" long will roughly simulate an AL13 w/valve.

This is an al6 from @rjack321
IMG00347-20120725-1853.jpg


One thing you can also think about is putting an inflator hose on your deep deco bottles and using that for inflation. 50% is a common bottle to get an inflator hose if diving OW where you aren't dropping things off. If you have 32% with you, that's obviously better
 
Last edited:
are you doing OC trimix? if doing it in OW and not squeezing through stuff, it may be easier to strap to one of your primary bottles than to try and butt mount it. The 13's are big, use your can light dimensions for relativity or go to home depot and get a short section of PVC pipe. 3" schedule 40 at 14" long will roughly simulate a 6cf w/ valve, and 4" sch40 at 16" long will roughly simulate an AL13 w/valve.

This is an al6 from @rjack321
View attachment 469580

One thing you can also think about is putting an inflator hose on your deep deco bottles and using that for inflation. 50% is a common bottle to get an inflator hose if diving OW where you aren't dropping things off. If you have 32% with you, that's obviously better
BTW that mounting sucks :D
 
6 cuft. is pretty small for OC trimix level dives. I'd just run an inflator off of a deco bottle if you're not using that much gas, and do away with the separate inflation bottle altogether.
 
https://www.shearwater.com/products/swift/

Back
Top Bottom