Con 14 2nd stage port plug O ring size?

[buddhasummer]

As per title, anyone know the second stage side port O ring size? I'm thinking it's a 012 ? Cheers .

 

[buddhasummer]

It's not, question still stands. Cheers.

 

[runsongas]

for the vintage port plug, the one with the smaller than usual hex opening and the conical head?

 

[Umuntu]

As per title, anyone know the second stage side port O ring size? I'm thinking it's a 012 ? Cheers .

I'm assuming that you are referring to O-ring 65 on the schematic. It's a Parker size 3-905, EPDM 70 Duro.

Inlet O-ring 60 is a 014. EPDM with a recommended 80 Duro.

 

[buddhasummer]

I'm assuming that you are referring to O-ring 65 on the schematic. It's a Parker size 3-905, EPDM 70 Duro.

Inlet O-ring 60 is a 014. EPDM with a recommended 80 Duro.

Bingo. Thanks a bunch. So the same as a yoke/K valve O ring ?

 

[inka]

Yes O´ring 014 works for Yoke/K valve

 

[buddhasummer]

Does anyone know the size of the inlet fitting O ring? and the nylon nut size? Pretty sure it's the same as used in a SP108 Cheers.

 

[buddhasummer]

Comprehension fail on the inlet fitting O ring, was posted above. Thanks.

Nylon nut size? Cheers

 

[James79]

1/4 inch nylock nut for the poppet stem, part number 1025-10. And it is the same for SP 108s

 

[buddhasummer]

Was hoping it was a metric size. Cheers.