a6xxx salted line your pre dive check

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

What kind of trigger extension do you have? Do you mind if you share a picture of it along with your tray?

This is my rig when set up for wide-angle:

XBdaVf6.jpg


This is the trigger extension that I use: US $65.0 |Aliexpress.com : Buy NiteScuba Diving Shutter trigger for TG5 TG4 Sony RX100 nauticam Canon g16 Fantasea Nikon Camera housing Underwater photography from Reliable Photo Studio Accessories suppliers on NiteScuba Store

Note that I had to raise the right handle by about 1.5cm for it to fit properly. It's a generic Chinese tray that I got from Aliexpress along with arms and clamps. The strobes are SeaFrogs ST-100 Pro which I cannot recommend - manual mode works only with wired triggering, and when triggered by fiber optics, they work only in TTL mode without compensation, broadly similar to Sea & Sea YS-03.
 

Back
Top Bottom