Zeagle Ranger Crotch Strap

[HKGuns]

Hoping someone can provide some information. I have the Zeagle Ranger BCD and am trying to add a crotch-strap.

I measured the installed tri-bar on the lower rear of the vest and it measures roughly 1.5". Of course, Zeagle sells 1" and 2" crotch-straps. I suppose I guessed wrong and bought the 2" strap and while I can get it to fit, it is a bit scrambled through the tri-bar, which may be better than the 1" which would be too small.

Does anyone know the proper crotch strap for this BCD? I sent Zeagle an email asking them, but figured I would post here to see if anyone had a similar experience.

Seems crazy they sell only 1" and 2" straps for an included 1.5" tri-bar.

Thanks in advance for any help.

 

[CathyE]

The crotch strap for my Ranger is a Y. There is a single buckle on the back of the BCD. The back leg is 1 1/2" and the two arms are 1". The BCD is about 10 years old.
Sorry to be of no help.

 

[Fishyhead]

I use the saddle strap (Y) on my Brigade as well. The strap isn't supposed to be all that tight so I wouldn't hesitate to modify a 2" strap to fit through the 1.5" tri-bar.

 

[HKGuns]

I use the saddle strap (Y) on my Brigade as well. The strap isn't supposed to be all that tight so I wouldn't hesitate to modify a 2" strap to fit through the 1.5" tri-bar.

I like that idea, thanks.