wewing1
Registered
I have new valves on the way for my 98 Utilus. What should I watch out for?
1.The manual says to lube(anti-seize) the valves, I am assuming they are referring to the threaded portion of the valve body only?
2.The manual doesn't say to but the 1st and 2nd stage heads have a sealant groove cut so again I am assuming a bead of high grade automotive silicone will suffice?
3.But what about the 3rd stage head? There is no groove in the head and the barrel of the piston assembly is proud of the jug it is installed in. It appeared to be a dry fit, is that correct?
4. Do the pipe fittings require any type of sealant?
Any guidance is greatly appreciated. Thanks
1.The manual says to lube(anti-seize) the valves, I am assuming they are referring to the threaded portion of the valve body only?
2.The manual doesn't say to but the 1st and 2nd stage heads have a sealant groove cut so again I am assuming a bead of high grade automotive silicone will suffice?
3.But what about the 3rd stage head? There is no groove in the head and the barrel of the piston assembly is proud of the jug it is installed in. It appeared to be a dry fit, is that correct?
4. Do the pipe fittings require any type of sealant?
Any guidance is greatly appreciated. Thanks