Rob Gardner
New
Does anybody know how clear (delete all dives) for an Oceanic Pro Plus 3 DC?
Oceanic ProPlus 3 DC
- Thread starter Rob Gardner
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
charlesml3
Contributor
I don't think there is a way. As new dives are added in, the oldest ones are pushed out.
The Pro Plus 2 is cleared by.....
1. When is surface mode press the left button 1 time for the Plan mode.
2. While at 30 feet press and hold both buttons until Set 2 appears.
3. Press the left button to display the first two digits of the Key Code flashing as 00.
4. Press the right butoon to advance to 01.
5. Press the left button to advance to the second two digits of the Key Code. flashing as 00.
6. Press rge right button to increase the code to 01.
7. Press the left button to complete the reset and turn the unit off.
I would guess the Pro Plus 3 would be the same. If not, check the back of the manual. In the Pro Plus 2 it is on the final page for the manual.
1. When is surface mode press the left button 1 time for the Plan mode.
2. While at 30 feet press and hold both buttons until Set 2 appears.
3. Press the left button to display the first two digits of the Key Code flashing as 00.
4. Press the right butoon to advance to 01.
5. Press the left button to advance to the second two digits of the Key Code. flashing as 00.
6. Press rge right button to increase the code to 01.
7. Press the left button to complete the reset and turn the unit off.
I would guess the Pro Plus 3 would be the same. If not, check the back of the manual. In the Pro Plus 2 it is on the final page for the manual.
Similar threads
