Closed FOUND! Affordable 7/8 manifold w/ or w/o valve plugs or just mirrored valves

[-JD-]

They are out on loan so I can't measure, but I believe they are pretty standard spacing. I have the rubber-wrapped bands on them and they are quite stiff. Also, since they are barrel sealed, there is a bit of adjustmet room on them.

I also have An XS/Thermo manifold set, but it is un-mounted. Like this:
XS Scuba Thermo DIN Manifold 7/8-UNF 3500psi
Note: picture shows a 230bar 3/4" version. The 3500 7/8s are 300bar outlets with no inserts but otherwise the same.

 

[Rollin Bonz]

They are out on loan so I can't measure, but I believe they are pretty standard spacing. I have the rubber-wrapped bands on them and they are quite stiff. Also, since they are barrel sealed, there is a bit of adjustmet room on them.

I also have An XS/Thermo manifold set, but it is un-mounted. Like this:
XS Scuba Thermo DIN Manifold 7/8-UNF 3500psi
Note: picture shows a 230bar 3/4" version. The 3500 7/8s are 300bar outlets with no inserts but otherwise the same.
View attachment 600894

At $339, I'm hoping to avoid going this route, but may have to bite the bullet.

 

[akrizan]

I was in the same boat after picking up a set of 7/8 120s. The shop said they had old valves/wouldn't service them so I had to go the new thermo manifold route.

I do have the old valves with plugs, bands and manifold though. I think they're Beuchat from what they said and not sure how available parts are. They're sitting in my basement so willing to part with them if you're still interested.

 

[OTF]

I would be shocked if those aren't serviceable.

 

[Rollin Bonz]

I was in the same boat after picking up a set of 7/8 120s. The shop said they had old valves/wouldn't service them so I had to go the new thermo manifold route.

I do have the old valves with plugs, bands and manifold though. I think they're Beuchat from what they said and not sure how available parts are. They're sitting in my basement so willing to part with them if you're still interested.
View attachment 601233 View attachment 601234 View attachment 601235

PM incoming shortly

 

[akrizan]

I would be shocked if those aren't serviceable.

There's a reason why I only go to this shop for bits, bobs and nitrox/air fills now.