Search results

i think this may have something to do with the flights getting cancelled. https://simpleflying.com/usdot-orders-delta-end-partnership-aeromexico/#:~:text=Summary%201%20Delta%20and%20Aeromexico%27s%20cross-border%20joint%20agreement,partnership%20is%20expected%20to%20take%20place%20in%20October.

they do dive very nice, they trim well, being low profile they don't roll you, and more compact than an al80, redundant and great for penetration diving. they are steel they are heavy but enjoyable to dive.

I will take a stab at this. I have the faber lp50's as doubles. if you dive them down to say 500 psi on your first dive and transfill with an al80 at 3000 psi it should equalize at about 1532psi. then if you top it off with a second al80 at 3000psi it should be about 2138 psi. (p1 * c1 / rp1 +...

I think this is pretty close to what is seen in playa. right down to the white smoke

I have a mares v32 reg apart for service and inside the reg the coating (I assume hard chrome?) has come off leaving the brass exposed. is this a problem I need to worry about? can I get it recoated? or is it a lost cause?

I use a double pistol hard case for 2 luna computers this is the one I use Vanguard Outback 30C Double Pistol Case

what kind of resolution are you looking at? looking at using fiberglass reinforced nylon at about $12 a pair. 100 micron If I print them I will print 10 pair keep 3 pair and sell the rest.

how did the ABS turn out? and how much to mail me 2 sets? 1 for me one for the wife...

been diving with a urostomy for 8 years. I dive dry and have no issues. I have done a handful of wet dives also. sea water does eat at the adhesive after a couple of dives.

Jax did you buy this?

I have a v32 but changed it from oil filled to dry cap never had an issue with it.

hopefully you figured this out but the first and second stage when they came as a set have the same serial #

hopefully you figured this out but the first and second stage when they came as a set have the same serial #

good luck in cancun, the sargassum is very bad over there. on the west side of coz you are fine

still got it?

not sure if his got fixed, but I have had the carbon regs a set for doubles with mr42t first stages and a set on a v32 first stage, I have them serviced yearly and never an issue with them. still very happy with them 5 years later.

I am looking to have an Olympus pt-ep03 housing serviced ie have all the button O-rings changed. does anybody know a place to send this in to have it rebuilt?

I don't have a pace maker but I have a medical implant that is in a pace maker frame. yes there is an air space in the pace maker. this is where the electronics are housed in the pace maker. mime is a research device but it was still pressure tested to 4-5 atm. mine is not life supporting and on...

well with nearly 200 views and no answer, I am going to say that would be a No! on to making my own..

if you use soft weights the 1# weights might get out