Going through the wife's MK20 again after it started dribbling out of her 2nd after our 1st dive on the last 2 tanker. I adjusted her 2nd to get it to stop and then checked the IP - was 135 but quickly creeping to 150. Creep was slow enough that her respiratory rate would make it a non-issue...
Parting with a pair of XL Original FFs in red and a pair of ML Original FFs in orange. Listed on ebay starting @ $35. I'd rather they go to a SB member so if you're interested......
So I got a G7X ii to replace my beloved S95 (Recsea housing started leaking and was in need of a rebuild which couldn't get done before the next dive trip). I had been using Inon UCL-165 & 330 lenses without issues and was very happy with the results. New rig is all Nauticam, including the...
pretty sure my S95 housing is leaking from the control buttons - looking for either a rebuild kit or a shop to perform a rebuild. Got another trip in less then 3 weeks so hoping for a quick turn around. Not wanting to go back to my Ikelite
Good discussion that started in Closed: - HP100 PST 3500 DIN
PST 3500 tanks only came in DIN and won't accept a yoke insert - thread area is physically thicker and won't fit most yokes
Just finished rebuilding the GF's MK20 and after putting pressure to it, it locked up at 147 - figured I'd need to remove a shim at some point so started into seating it and began cycling the 2nd stage which dropped the IP to 115ish and returned to around 135 where it paused but then climbed...
GF has been diving a SP Classic since the 90's (it was her OW training rental) but it's getting pretty long in the tooth. I have a Zeagle Zena that I'm trying to put her in but the lack of large pockets make it a no-go for her. I have to admit though - those pockets are nice to have - big and...
Looking for parts to repair my bumble f*&#ery that I performed on my GF's UW quacker. I've tried DiveAlert - too old and not supported anymore. If you've got one, or parts of one (I'm looking for the button spring closure plug specifically) I'll be happy to take it off your hands. Thanks in...
DiveAlert used to make an underwater 'quacker' called the Mini-Hammerhead. A fairly small but exceedingly annoying device that is way louder than their current version (of which I actually have 2 of but thankfully rarely ever use). My GF has the aforementioned Mini-Hammer - She is my spotter...
Looking at my new (to me) DIN regs, it seems that the simple push on cap wont seal worth a crap during a soak since the o-ring is at the end of the DIN bolt which isn't compressed. There's leak paths between the wheel and bolt as well as along the threads. Other than soaking my regs...
So after rebuilding my Zeagle sets, I figured I'd look into doing the GF's SP sets. I was a bit surprised to see her older MK16 was actually a diaphragm type and not piston since i was hoping to do that one as practice before starting on her primary set. Can't even say when the last time that...
After having some issues with both of my reg sets (FH XP and T50D with ZX adjustable 2nds and Octo-Zs) immediately after their last LDS servicing (during a SB trip of course), I decided I was likely better off doing the servicing myself at the next go-round. I picked up a 3rd set (FH 6)...
Looking for a replacement purge cover for my ZX primary 2nd stage reg. Went to clear it after the dive and put my finger through it - inspection showed a very brittle and cracked cover but otherwise no damage to the diaphragm. Anyone have an extra cover laying around they can part with?
GF just purchased a used Luna but was told by the LDS owner that once the owner info is entered, it cannot be changed. I had purchased a cheap IR dongle to change the settings (and download her dives) but of course that dongle couldn't communicate with the DC. (am now seeing that the number of...
Recently had my one of my beloved HP steel 100s condemned during hydro for bad threads so looking for a replacement in the Florida area. This was supposed to be a lifetime investment so it's quite painful. Thanks
Looking for a source for the screw on adapter part which connects the fiber optic cable to the strobe. Can't see spending lots for a complete assy when all I need is the adapter. Any one got an extra from a damaged cable or know of a vendor? Waiting to hear back from Reef but thought I'd ask...
eBay listing for an old style single handle quick release tray. Didn't sell the 1st time so have relisted. I've gone to dual handle/strobe setup so clearing out my old gear. If I can get $20 for it shipped I'm good. Ikelite Single Handle Tray for Ikelite Housings 9523 | eBay
Bit the bullet and bought a 2nd strobe so now I'm in need of another FO cable as the correct Inon Inon-to-dual S&S offering is a tad pricey. Testing the waters to see if someone has one they aren't using - working or not as I'm mostly interested in the Inon type-4 hardware (90 degree piece that...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.