Search results

Hey mate, Im keen to offload mine. Glass is solid just the OLED is shot. Im in Brisbane so will be minimum postage.

There are some great instructors located in Guam as an option if you wanted to save money on travel. The best piece of advice I was given when starting down the tech path was you need three things: be physically ready, mentally prepared and third was financially ready. It gets expensive and tech...

@dberry if what you are saying is true than you would not be able to isolate a reg in the event of a free flow. PfcAJ is correct the manifold is operating as it should.

Are you using a 90° connector between the reg and the lp hose? I found that really helped the reg sit nice and also reducing any pulling on the mouth when turning your head.

Mods, Could i please change my username to QLD_Diver please. Thanks in advance :)

Ron, Thanks for taking the time to share that handy bit of information with us. After doing some more reading on PMOLEDs I found out that blue is also the most unstable of the OLEDs and has a significantly less lifetime when compared to red. (This is relevant in my case because there is also...

Perdix AI is definitely on the cards :wink: I just wanted to make sure I had explored all avenues before throwing it in the bin.

Did you have any luck diagnosing this fault? My Aeris A300 CS is doing the same thing making it almost impossible to use.

I am curious if there are exceptions to this? I currently use a Dive Systems Manta harness which is continuous bungee. I was taught to keep the leashes short as possible to torque the tanks (i have manifold valves with longer posts to hook the bungee around). It my limited experience this setup...

The T3 second stage has a longer connector and will need a Jam nut (cost around $10 - $15) when changing out the atomic swivel hose for a standard lp hose.