Search results

No problem. Glad that it helped. I've no problems since putting mine in. Best part is I take my side cover off to check the oil and inspect the compressor every time before I start it and there is no mess in side. Before I had to wipe it down everytime as I like the compressor to be spotless.

I really wouldn't worry about the rubber belts. If it's seized up it's not pumping air anyway. I have my air inlet out side the compressor in the room. I also have a fan blowing across the top of the compressor. It really keeps the heat down around the compressor. it looks like this and they...

I would get this with my compressor. I made a little accumulator. It really didn't have to do with the time of the blow down but the force of the pressure blowing off. Coming out off the 1/2 hose was a lot of force with the air. The water would just spit hard into the filter. As I saw a lot of...

I like to gear dive on a couple wrecks in FL. First dive that day last month 15 snorkles, 3 mask, 1 dive watch, 2 smbs, 1 400' Halcyon reel, 1 dive knive and 2 weight pockets. not in the picture- 2 more nasty looking mask 4 weight pockets and some weights The next day 2 snorkels, 1 shears...

I have one on my portable fill wip, It works fine.

I got my hoses made from these guys. https://www.breathingair.com/t/product-line/fittings-and-accessories/hose/ Mine were in 2 foot lengths with swivel pipe ends. Also another good company to deal with are these guys and most likely cheaper. BAUER Compressors genuine parts and full service with...

arcesexpress has them on e-bay, 275.00 with free shipping or you can get them with the gauges for 299.00, I've purchased from them before and were great to deal with Below is a link to his ebay store items in acresexpress store on eBay!

Northeast scuba has them. Needle Valve - O2 - Male to Male - Northeast Scuba Supply

The biggest thing is not the weight release system inquestion. Heck did he even try to ditch his weights. Since this person can’t speak the department might said this to cover their own mistake up. 12 BC’s not working sounds like it was strung wrong or overweighed as others...

Yes the box above, is the tri hunter controller. I can mix both nitrox and HE thru the compressor, It has the meter valves built in and has the compressor saftey shut of soleniod inside. You wire it to the compressor. No it's not tied into the net book. I use the net book to figure out the mix...

Couple more things. On the fill manifold, move the check valve to between the manifold and the shut of valve like the above picture. The way you have it your going to see line pressure and not tank pressure. After you shut off the valve your still going to see your line prssure. When the tanks...

HI Mike, Nice system you have as I've seen some pictures from another post. With the Tri hunter system you will need none of the following items from the O2 bottle. The regulator,solenoid valve, check valve, needle valve and pressure gauge can go. This is do to the the Tri hunter will come with...

The other guys diving double 100's had run times close to as you just stated. Don and I were diving bigger doubles and both had 72's of O2. That would have been way more than enough O2 to handle any emergency or failure under water.

the dive time has been stated and the the depth was 1.29 ppo2 As for the fill station that did the air. It was my fill station. I'm quite anal about my system and how clean it is. The complete system is O2 clean inside except the compressor as I didn't take it apart. Systems under 40% do not...

TO my good friend Don Zantop. This is for you The answer to the mix is here, Don would have wanted to state it. He loved playing with numbers and was very good at it. So this is for Don 1). Depth was stated in report 2). Ppo2 was 1.29 based on the depth I stated 3). The EAD was 62...

He pressed his own purge button. I think he died after he pressed and his body went stiff holding the button in. I know his hand on the rope was stiff as I had to also pull his hand up as he was holding it. When the air ran out he was still holding the reg with the purge pressed in. I never have...

You got me where all the ox tox came from. We were diving under 1.4 ppo2. It was also the first dive of the trip. I don't think anything has to do with the purging of the reg. His problem started before the purging of the reg. Someone even stated why I allowed it. My buddy had a problem. If...

I never posted the mix. But everybody except here knows it. Yes everybody on the boat, crew, captain and dive store owner knows. The coast guard, family and close friends know. All my tech and cave instructors know. All of Don’s instructors know. Not one person said we were diving outside...

Yes the coast guard knows everything. I’m glad you’re trying to look for something more but it’s not. If you were a crew member on a boat and you let people off the boat diving to 100 foot on 40% you should have been fired for allowing it to happen. I or any of the people I...

You got the facts in my report, I'm not going to explain anything on this forum. And that's the facts. For people wanting to learn more. I would suggest taking a stress rescue class if you have not done so. For more people want to learn more about tech diving, ox tox, CNS and more...