Hello David,
I can confirm Joshua's information from the following image I found online, [티몬] 더베스트닷컴 대한 황대수경 스킨스쿠버 물안경 휴가 물놀이.
#3 (green arrow) is the company name
#4 (red arrow) is their address, which matches what Joshua found.
No phone number though, the number at the bottom is for a...
+1 to too much air in bladder.
Experienced the unbalanced bladder issue before when I was 8lb over weighted. No issue after I realized I was over weighted...
+1 for travel harness.
Love it without the bulky integrated weight pockets, especially when you don't use any weights.
Different strokes for different folks, having the option to change the harness is awesome.
HydrosPro is not perfect but I still like it, and I bought 4 more knowing the issues.
1) Straps were all replaced under warranty, fairly simple.
2) Air being trapped on one side is due to too much air in bladder, make sure you're weighted properly, and if it happens just pull down on the...
@buddhasummer ,
Yes, adjustment is made when depressurized. I believe it's nearly impossible to turn the screw when it's even little bit pressurized, I haven't tried though.
@couv ,
Yes, there is a metal spacer between the adjustment screw and the HP seat. I will try removing the washer...
Some places in Philippines still use Type A (USA) @ 220v and some places use Type C/F.
I have also seen places with both Type A and Type C in the same room running @ 220v.
Regarding power strips, you must NOT use 110v SURGE protector power strips on a 220v outlet. Obviously the surge protector mechanism will kick in and burn out, killing the power strip forever.
What you want/need is a power strip without ANY switch, light, button, or surge protection.
Like...
@travlbum ,
Sorry to hear about all the problems. I'm curious about the backpad disconnecting from the backplate. Any chance you can include some pictures?
Also, what did SP say about warranty repair, if anything?
Thanks,
hmmm. same here..
There are other SP(and other brand) schematics floating all over the Internet, but I guess two wrongs doesn't make it right.
If anything, I can remove. Just let me know.
Thanks,
Ha ha. That is strange.
Correct, no shim under string and metal spacer on top of the HP seat. Weird thing is that these two MK25EVO are fairly new, less than 50 dives.
I gonna swap springs with one that requires a shim and see if that helps.
Thanks again!
@axxel57 ,
Thank you for the informative reply. I am usually trying to decrease IP.
Sometimes lowest I can get to is around 145ish with screw in all the way. When greater than 145, seems like only option is to change the seat.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.