Search results

I have one of these and it hads had the non explosion update installed. I was wondering why these were made for such a short time as they seem to be a good very light 1st stage reg. I know they are aluminum. Is there any particular care I should take of this over and above the normal care and...

Hey guys. I need just the HP seat for an Atomic T2. The second generation one that has a slightly blunt piston end and that has a recess and is marked with a "J". After 2002.On an exploded view it is #01-0018-00. Rest of the reg is perfect and don`t want to waste a $30 kit for a bad LP seat...

I have a new (to me) 620Ti that on exhalation when above water "farts". The exhaust diaphragm vibrates. At any depth underwater it stops. My 600 doesn`t do this and they are of similar designs. I even swapped out the diaphragms but it didn`t make any difference. If I put my finger in the exhaust...

I have a MK20 Ultralite that needs a new piston. Someone at one time degraded the edges of the two o-ring retainers which I think has compromised it somewhat. Instead of being a perfect circle it looks like someone sanded down the edge. Maybe a fifth of the width of the depth of the groove. The...

I got my first regulator that I actually had to break to get it apart, an older R109. So, I need the following from the schematic; #29 Housing, part number 11190105. And to go with that, #30 Housing insert, part number 21080121. They made an older housing that didn`t take the insert and was...

I was checking out my old Atomic T2 second stage and discovered that the diaphragm on the automatic flow control vane in the mouthpiece was very slightly torn. I doubt my LDC would sell me one for fear I would die underwater and sue them. So I was wondering if anyone out there would have access...

I have a question that I think belongs here. I have an old Scubapro depth gauge that has a bubble in it. I don`t even know if it works or not. Would depths of ,say, 120 ft crush the air bubble and fracture the gauge? I`ve seen these bubbles in different equipment for sale over the years...

Anybody out there know if you have to have the honker underwater in order for it to honk? It just doesn`t honk. I had it on a tank and tried it at 500 and breathed it down to 200 and no honk. I did not have it in water though. So...….does anybody out there know if that is necessary or if there...

I recently won an auction that includes a Scubapro 109. I already have one but this came with a MK5,so why not. I had gotten a Duro poppet upgrade for that 109 so I could replace the LP seat as needed. Wasn`t really looking forward to spending $25 plus shipping for another upgrade. I got to...

Hi guys, I am in need of part #1000-25 from the parts list for this regulator. It is # 16 in the key and is just called a pin. I don't know if I can make one as specifics are hard to come by.to come by. I don`t want to have to buy a complete double hose to get this tiny part. Anybody got one or...

Does anybody out there have access to Atomic repair kits? Specifically for the T2 Titanium 1st and 2nd stages? Or know where I could lay my hands on one? Thanks!

I`m looking for a diaphragm for my old second stage. Larger in diameter than normal at 3 3/16 inches. Anyone out there have one in this diameter? Needs to be a newer silicone one. The old one turned to the consistency of cardboard and doesn`t breath very well, to say the least. Thanks.

Can anyone tell me the difference between the G250 and the G250 Graphite? I have them both and have had them apart and still can`t tell the difference. Thanks!

OK guys, I have a challenge for you. I have a vintage Healthways Scubair second stage in super condition. Except the diaphragm. It`s lost a LOT of it`s flexibility in 40-50 years. I`m looking for a replacement. It doesn`t have to be exact but pretty much anything would be better than the one it...

Quick question. What size is the nyloc nut used in the Scubapro R190? I`m pretty sure it`s a standard size, but I don`t want to take it to Menards to check the size and then order it. Thanks in advance guys.

I have an older Scubapro R190 and it is missing the housing plug Part #11300037. Can`t find one of them anywhere. I found S Part #210801121 called a Housing insert on E-Bay and was wondering if any of you dive nerds out there would know if these are the same parts. The reg seems to work OK...

Hi, does anybody out there know where I can get a new or good used purge button for a G250? I have one with just 3 legs and would like a 4 legged one. Thanks!