Search results

What do you want for the din conshelf reg shipped? Thanks

A company called Lube V makes all kinds of synthetic breathing air oils and will even custom blend to your specs. That is what I use in my Luchard h6 compressor in 30wt. They sell direct by the quart so no big expense. In my coenelius compressor I use Mobil jet oil 2 but when my stock runs out I...

My 130r1500 is pretty loud but not horrible. It takes about 45 min to fill an al80 from empty to 3000psi. Runs on 110v which is nice and super portable.

What are you asking for it shipped?

I have seen these used to pump to 3000 psi but usually with a different motor and belt driven. I do not know what the actual cfm is. I have a 130r1500 built by cornelius in the 50's. It is rated at 1.6cfm and 3000psi working pressure. My cornelius works great but it takes a while to fill. Not...

I still dive with my Aquarius and also use one for my pony bottle. They are as reliable as you can get. Very easy to rebuild them and parts are still available. Good breathing regs but limit depth to 120 feet or so.

I have been diving for 40 years with diabetes type 1. It can be a challenge to keep my glucose levels steady on multiple dives and/or long swim beach dives. I try and keep my sugar levels a bit higher before and during dives. I wear a pump and just disconnect before dives and do a quick glucose...

I used a cement mixer to tumble mine. I shoved wood and towels around the tank to center it and it worked well. I used dawn dish soap, 1/2 tank of water and 16 oz of aluminum oxide. Rinsed it out with cut of hose stuck up inside and then after it was clean used hot water for final rinse, then...

Hello folks I have a few questions about the cornelius 130r1500 compressor. If any of you have one please chime in. I have been using my little compressor for a little over a year. It runs good and pumps to 3000 but it gets pretty warm and it also blows a bit of air out of the oil cap vent hole...

Thank you, i figured it would easily do 3000 but wanted to check with others. The original filter unit is not being used as it was pitted inside from sitting with wet a/c inside so there is no pressure relief valve as of now. I might take the oil/water separator off my Cornelius and add that to...

I also have a h6 compressor in working condition, I was only filling to 2640 on it but would like to fill some of my higher pressure tanks. What pressure have you guys gone up to with your h6's. What do you think the safe limit is without burning up the pump. I use synthetic 30wt breathing rated...