I know. But I can set the time only in the format of AM and PM, not 24 hours format.
I found the Apeks Quantum manual online and now are able to set the time format(24 hours) I wanted. Thanks for your attention.
Hi All,
Does anyone know how to set the time in an Apeks Quantum dive computer in the 24 hours format? I just replaced the battery of my dive computer, but could not reset the time in the 24 hours format that I preferred.
Thanks for any help.
Terry
Hello Jean,
I am considering to purchase an Aquatica Nikon D-7200 Housing and maybe use a Nikon 10.5 mm f/2.8 fish-eye lens or a Tokina 10-17 mm fish-eye zoom lens. Which dome port should I choose? Please advise.
Thanks and best regards,
Terry
Hello Ron,
My student's Cobalt 2 computer seems cannot hold its battery charge again. But I lost the instruction of how to diagnose the battery status. Could you please post it here so that I could do it again?
Thank you very much for your help.
Thanks and best regards,
Terry
Hello Henddrik,
There is no instruction sheet to show how to install the bungee cord on the bungee mount SK-8. Could you please help?
Thanks and best regards,
Terry
Hi All,
Just saw the Suunto SK-8 released in the market recently. Has anyone compare its performance to the previous model SK-7?
Should I upgrade my SK-7 with the SK-8? Thanks for any of your input.
Terry
Hello Ron,
When the Cobalt 2 returned to the Canadian Distributor for check up, the technician updated the firmware. I will follow your instructions to diagnose the battery status and let you know.
Thank you again for your help.
Best regards,
Terry
Hi Ron,
One of my student divers' Cobalt 2 dive computer seems not be able to hold the battery capacity. After fully charged to reach 100%, next day went out diving for 3 days and made 5 dives(average 45 minutes bottom time with 1 hour surface interval), ended only 5% left in the battery...
The brightness setting I believed is high. The first day 2 dives were about 45 minutes each with about one hour surface interval. The second day 2 dives were 50 minutes and 40 minutes, again with slightly more than 1 hour surface interval. The last day dive was 1 hour. The computer had never...
One of my student divers' Atomic Cobalt 2 dive computer seems having a problem of battery not holding its capacity.
First experience - after fully charged the battery to 100%, went out diving 2 days later, found the battery status was only 87%, made 2 dives, battery capacity dropped down to...
Unfortunately the nice Tibby-Adapter is not available for the Suunto D4. Please see the below link:
News - Tibby Adapters and Straps for your Suunto Dive Computers and watches
Please refer to the link below and contact Atomic Aquatics directly for help:
http://www.scubaboard.com/forums/regulators/443869-great-customer-service-atomic-aquatics-my-t2-regulatos.html
They have great customer service.
Personally I have fixed a pair of Oceanic fins with the same problem for one of my divemasters. I just ordered a pair of stainless steel spring straps(C-Strap) from Apollo Sports USA, cut off all the rubber nubs and installed the spring straps on the fins. Please refer to the link below for the...
Thanks for your suggestion regarding the buttplate. Unfortunately, my stripped down OMS Manifold requires more or less like an end cap with female threading and a sealing surface similar to the DIN valve. The male threading end plugs won't work for my OMS valve.
---------- Post added January...
What A Great Job! Thanks for Sharing.
Wow! It's a great great job well done! I can't think of any better idea to modify your previous drysuit.
---------- Post added January 22nd, 2013 at 10:02 PM ----------
I have just installed the Si Tech Cuff Rings on my friend's drysuit using PB-300...
I have just stripped down my BM Tec Deep double tanks in order to go SM Tec Deep. For converting my OMS V101 double tank manifold into V103 and V103-L valves, I need two pieces of V112 end plug. Does anyone know where I can get these parts?
In addition, any source of a buttplate for my OMS...
I have two Atomic T2 regulators with four T2 second stages for quite a while. Over the years two front covers and three strain relief sleeves of the second stage cracked and became brittle.
Called Atomic Aquatics at 1-888-270-8595 one day while Ryan Kenney answered my phone. Explained to him my...
I think some of the Atomic regulator parts are made in Taiwan. Something like plastic or rubber parts. I believe the innards parts, especially those titanium parts are sure made in USA.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.