Search results

On my unit, it switches back on when I get to the Dive Menu.

No, only first buyer can have the warranty.

I see that you have the same lever problem. You can check it yourself, open the cover of the Zeta, remove the diaphragm and attach the regulator to a tank. Submerge the Zeta into some water and if you see small bubbles coming from under the lever arm then, it is the Arm that needs changing.

We have seen the same problem with multiple Oceanic unit and when we used "Panasonic" or " Sony" batteries it was solved. Looks like some brands didn't hold the same voltage full time and the PDC understood that as a Low Battery.

In fact, I have seen this "Special Mouthpiece" problem and it was cured when I used the one supplied by Oceanic which was slightly longer than the standard ones. Have you ever changed the lever arm ? After time, there is a slight groove in the rubber that will open the air stream, starts like...

I believe you got an Oceanic DX2 balanced First Stage with a Delta 2 second stage. The Delta second stages uses an Oceanic universal kit (40-6160) The Dx2 Yoke service kit is (40-6103).

This issue was discussed before in the following thread: http://www.scubaboard.com/showthread.php?t=182528&highlight=Atom

Yes, both the VT3 and the Atom work on the same transmitter (# 04.8000.02 )

I believe the Free Dive will enter the deco/saturation data into the profile while in the gauge mode it doesn't do that (Just a Counter)

No it won't, there are 3 different cables: 04.9600 USB for the PP2, VT PRO, VERSA, VEO 04.9604 USB for the VT3 and VEO 04.9610 USB for GEO/ ATOM 2.0

The best way to check the leak is to put the regulator on the tank and submerge it then check where the leak is coming from. Might be just a loose connection.

Yes, I believe the Data Plus uses a standard size O ring size "023" as you can see from the part number. I just double checked it with an O ring sizing chart. As for the Durometer, maybe Doug can help you with that.

I believe that the unit has returned to the default Nitrox mode for the second dive maybe because the battery was replaced or just accidentaly. Yasser didn't send the computer to me so I believe that was the problem.

Actually Doug, I asked him to explain the problem on Scubaboard :D The best way is to discuss it with all you guys online and give all possible details. Yasser, I sent you a PM with my office address so please stop by anytime.

Looks like if you try to power up at depth, the depth sensor cannot calibrate itself. If it was started at 10 meters for example then at 15 meters you will actually be, for the unit, at only 5 meters. I believe the unit has a sort of security measure to prevent this from happening.

Hi Yasser, Can you please check your Data Plus to see if you have set the default value to Air (21%) or you didn't. The default factory setting for the computers is to reset itself to 50% Nitrox on the next dive automatically to maximize safety. If you haven't modified it manually when you...

There was a sort of crack/problem in the diving platform in the back and the water started entering the engines compartment and couldn't be stopped. There is a plan to lift it up again and repair it !

Hi Jarret I am sorry but I don't really understand what you meant by "Wheezing" Can you provide more details ? Thanks.

Yes, they are always attached. You should contact the place you got it from. In some cases, people like to tuck it in the pocket and this might be why they didn't notice it was missing.

Hello, I am the Pelican distributor in Egypt and I have forwarded your above link to Pelican so we can get you details on the closest dealer who has the required O rings.