Search results

  1. 3

    Small 4000-4500 psi Compressor

    Hey guys, I am a certified tech and I am looking for an affordable compressor that can fill tanks at home. Doesn't have to be large since I may do 5-10 regs a week. Has anyone found something affordable? I see some of those $300-400 paint ball compressors out there that seem to be adequate. Some...
  2. 3

    Need a plug for pressure testing computer transmitters

    Anyone know where I can get a plug to install on computer transmitters when doing pressure testing after battery changes? Thanks
  3. 3

    For Sale Scubapro Mk10 with G200B and G200 Seconds

    Fully serviced Mk10 with G200B (balanced) primary second and G200 Octo. Includes brass and glass SPG. First stage IP locks up at 144psi and cracking effort 1.2" H2O on both seconds. Four new hoses, new mouthpieces and 3 service kits were installed as part of service. Dived once in the pool to...
  4. 3

    oms Professional Dive O2 Analyzer

    Hey Guys I have an old OMS Dive O2 Analyzer. The yellow one that looks like a number 8... It needs a sensor and the numbers on it are 02.133.48097 029. Nyone know where I can get a replacement or if it's even available? By old I mean early 2000s.... Thanks
  5. 3

    Draeger Ray

    Hey guys I recently came across a Ray and was wondering if this thing can be brought back to life? If so I would love to be able to find someone(prefer Tx) that can train me in the rebuilding, maintenance and use of this unit. I know it is a limited use unit but I think it would be cool to dive...
  6. 3

    Dacor DH Thoughts

    Hey guys Just curious, is this Dacor able to be brought back to life or is it just a display reg? Thanks
  7. 3

    DA Aquamaster Retaining Nut

    Hey guys, can you guys point me to where I could find the tool that engages the body castle nut in the DAAM? I am trying to avoid the screwdriver drift method if possible. Also, any other tools to properly service these units? I am a certified tech for the modern regulators with an interest in...
  8. 3

    Dacor 650 Service Kits

    Hey guys I came across a nice regulator set consisting of a Dacor 650, a Pacer XLbrass primary 2nd and a Pacer octo. I have some NOS kits for the Pacers but no kit for the 650 first stage, Anyone out there have a ouple of kits they'd be willing to part with? Thanks
  9. 3

    Aqualung i450T o-ring size

    Hey guys, it appears that the o-ring for the AL i450T watch is a 39mm x 1.5mm. Can anyone confirm this? Thanks
  10. 3

    Anyone Diving a Ratio Dive Computer

    Hi, just wondering if anyone is using a Ratio and what the general opinion is of these computers? Thanks
  11. 3

    Servicing Poseidon Regs

    Guys, I just came across a couple of old Poseidons. I know there are specialized tools to work on these regs but I would prefer not to spend lots of money on a reg that I may not ever see again. The regulators in question are a 3590-M and a 2960. Is there a way to get the seat out of these...
  12. 3

    Regulator fitting help

    Hey guys, I need to turn the SPG end of a high pressure hose into a 1/4" NPT. Which fitting would I need for this? I would like a swivel fitting for this end. Thanks
  13. 3

    Regulator Service Rates

    Hi everyone, I have recently started to get certified to work on regulators and have the opportunity to take on the service department at a LDS.So far I have taken some Aqualung classes and will be doing Scubapro, Atomic, Zeagle, Oceanic and Hollis soon as well. I was wondering what regulator...
  14. 3

    Regulator Technician

    Hey guys For those of you that are regulator techs for a dive shop, what do you typically get paid for a full reg service? Do you get paid by the stage or by the set? Thanks
  15. 3

    Help with Sea Quest

    Hey Guys Anyone know where I can get service kits and if AquaLung has these available? The regulator has the foillowing (pic attached) : 1. Environmentally sealed first stage 2. SQ Cryo XR2 second 3. SQ Mirage Octo If anyone knows where to get the service manual and if these take any sepecial...
  16. 3

    Help Identifying First Stages

    So I acquired these a while back and they have been in a box for about 10 years. Finally getting around to trying to figure out what they are. The second stages that are attached are Sherwood and ScubaPro G200. The other set had a badly work and craked second stage that was not your standard...
  17. 3

    Old Regulator Service and Rebuild

    Hey guys I am trying to get back to doing some diving and need to get my regulators up and running after storing for about 10 years. Rubber purge button has disintegrated. What I need to know is whether someone here has new parts for these? I know they are Aeris which were built by Oceanic. I...
  18. 3

    Help With Oceanic SWIV Console

    Hello guys, I have a 3 gauge Oceanic SWIV console that is many years old. It looks like Oceanic still manufactures the console. After many years of storage and not being used, the plastic has degraded and shattered. I was wanting to know if anyone knows or can get the housing for me? Thanks
  19. 3

    8000 Lumen Video Light

    With 8 XML LEDs, taskled driver and new 3.5" TLS canister... LEDs will run 2 strings of 4 in series. Vf is about 12 volts at 6 amps! Will use a 6S LiIon pack by 3 parallel and PCB with balancing function.
  20. 3

    tlslights.com light clearance

    So over time I have built quite a few prototype lights. I need to get rid of them so I am pricing these to go. There are 4 of them. Some just the head and some complete. I can sell these however you want them, though. I can finish them, sell them as pictured, include battery and charger, etc...
Back
Top Bottom