Search results

I'm looking to buy a new pair of cylinder valves and see that some valves seal the bonnet nut with a copper crush washer and others use a #015 o-ring, are there are any pros and cons between the two? In the past I have seen crush washers that were difficult to remove, but is this the only...

I'm trying to find a dive charter for the Straits of Mackinac that can accommodate 8-10 divers. Can anyone suggest who to contact?

Has anyone been diving at Lock 21 near Cornwall Ontario recently? I'm heading there with a small group of friends this weekend and we're interested in any site updates, water temperature, current, etc...

I'm looking for recommendations for replacement 2" harness webbing type/stiffness and suppliers.

I'm in the market for a new pair of modular valves for my sidemount setup. Are Thermo valves worth the money? I've been considering the DGX Premium Long Neck... I'd love to hear what people think about these two valves or anyother recomendations and why?

I'd like to start servicing my own regs (part of the reason bought a Deep6 setup for sidemount). Does anyone have plans for a Deep 6 Service Clinc, either in Toronto or close to?

I’d like to change the dry glove system on my Whites Fusion drysuit which currently has the Si-Tech oval (QCS) attachment system. I’ve always used pull-over gloves and not the Si-Tech Antares rings that the ovals are suited for as I’ve heard nothing but bad reviews about them. The problem with...

Now that I've installed my pee-value with good success, I'm wonder what is the best way to clean it out after a dive. I really dislike the smell of vinegar; has anyone used Urolux before? Urocare | Products - Urolux Urinary Appliance Cleanser & Deodorant

This may seem like a dumb question... I found a used xDeep Stealth 2.0 Tec for sale, but when I go to buy it how can I tell if it is indeed a Tec and not a Rec? They both look similar to me; I would imagine the difference would be apparent if they were side by side, but I won't have that...

I bought the Aqua-Lung Drysuit Patch Kit to reinforce the inside of my Whites Fusion for a pee valve. But the patches have a grey and black side, which way do I install the patch? I'm thinking "grey side down and black side up"...

I bought a Halcyon pee valve for my Whites Fusion drysuit and year ago, but I just couldn't bring myself to punching a hole. Every time l reached for the hammer I broke out in a cold sweat. HOPEFULLY today I'll get up the courage (and not screw it up). :fear:

Are there any dive centers in Ontario Canada other than the one listed on the RAID website? The Total Wreck Divers website and Facebook page don't seem to have been updated for a few years and I'm not sure if they're still active.

The rubber toe cap on my Whites Fusion boots has come off in a few small areas and I'd like to glue it back down before it gets any worse. Does anyone have any suggestions as to what adhesive would work best?

What's the pitch of the holes in the single tank wings? Will they work with a Halcyon backplate?

Just picked up my first Shearwater, a shinny new Perdix. I can't wait to get in the water with it :)

I think it's finally time for me to add a p-valve to my Whites Fusion Bullet. Is there a valve that is better suited for the Fusion? I'm considering either the Halcyon Streamline, Light Monkey Tinkle, Si-Tech Trigon, or the Dive Rite balanced valve. There's a great post by "skdvr" on p-valve...

Is anyone else have problems with the Aeris Computer Interface? On one occasion the Dive data has the correct min temp of 38F but the Dive Details showing the profile had the temp at a constant 81F. On another occasion the Dive data showed a depth of -- and therefore wouldn't show any Dive...

I'm currently diving an XTX200 Reg & XTX50 Octo with standard (Apeks supplied) hose lengths. However, I would like to change the hose configeration to a Miflex short hose with necklace on the XTX200 and a Miflex long hose on the XTX50. If I switch the hoses out will there be any issues...

The Nitrox stickers on my Faber tanks are looking a little worse for wear. Does anyone have any advice on how to remove them cleanly and any adhesive left behind?

i'd like to put together a bailout bottle and I figured I'd throw a post up to get some feedback. I'm leaning towards a 30cuf aluminum tank with a HOG D2/Classic reg set. I'd love to hear peoples thoughts and opinions on this and hose (length/braided or not), pressure gauge recommendations...