regulator

I rebuilt my regulator, and noticed with a tank filled to 3200 psi the IP will creep to 165 in a about 5-10 min, at 2000 psi it will lockup at 142 with maybe 2 psi creep in less than a minute. Don’t understand why it would creep 25 psi with higher tank pressures. Was thinking seat but why would...

Hi all, new divers who just invested in x2 Apeks XL4+ kits for me and my wife. After reading the manual it specifically says about pressurised soaking the regs for around an hour, which I intend to do. TLDR What kit should I get to pressure soak the regs. I was intending to get a "spare air"...

Here is a used but excellent Atomic Aquatics B Series 1st and 2nd stages regulator for scuba diving. Reg in excellent working condition. Cosmetically it is not the best looking reg, but after service it will perform like any $700 reg. Atomics are bulletproof regs and their technology is...

Gone

Hey guys, nice to meet you all! This is my first thread on this website, so I hope it follows the site rules :) (I've looked up TMJ on the forum, but the newest related post was from 2013, so maybe there is something new that's been developed since then?) So basically, my right TMJ has been a...

APEKS XL4 Octo second stage regulator. Purchased in 2018, but used on less than 20 dives and well cared for. Like new condition. Retails for $229 online. $140 or best offer.

Hey, wanna your advice. I just switched to sidemount and plan to buy my own regulators set. My diving will be mostly warm water. Diving in multi stages will has high possibility to upgrade for tec diving in future. The available sidemount sets are: 1- Scubapro MK25/G260 set. 2- Apeks...

Hi all, I was looking for some advice on the AquaLung Legend Lx Supreme that was I think last year’s model but has since been discontinued by the company in favor of the Leg3nd series. What are your thoughts on purchasing used regulators in which warranties will no longer be honored due to...

Was having some trouble tuning my SP 108 HP, tuned it best I could, it wasn’t bad but still breathing off it didn’t seem great. It was suggested maybe I have a weak spring and to try shimming it up to increase spring force. I didn’t have any washers that would fit over the poppet stem. So I...

I was pondering a 13 or 19cuft pony setup. Anyone just attach it to an integrated inflator / octo setup to avoid additional hoses? Obviously the downside is that I'd be using my octo air when I'm adjusting boyancy, but my purpose for it is otherwise as a bailout tank only not deco tank and I'm...

Want to buy a dive rite reg for deco. Nothing special, preferably o2 cleaned and unbalanced first stage. Located in cave country.

Less than 10 dives on it. 600 plus shipping - venmo accepted

- Aqualung mens large aquaflex 2mm shorty suit - $50 -Large 5/7mm Aqualung hood - $10 -Large whites zip-dry hood - $10 -Aqualung size 11 superzip boots - $30 -Apeks MTX-R Ultra Cold Water Regulator - $600 -Aqualung Reveal X2 Mask with Case - $50 -Apeks Super Grey RK3 Rubber Fins w/ Yellow/Orange...

Great condition Apeks MTX-R White regulator. $600 OBO plus shipping. Accept cashiers check and venmo; willing to consider others and will ship.

$300 plus shipping Accept multiple forms of payment - Just let me know your preference and we can work it out

As a measure of self-protection against the coronavirus, I am thinking of buying a regulator for diving and so I decided to open the topic here to ask for your opinion and I believe that this topic can be interesting for other divers too I've been reading a lot about it, I've read a lot of...

It would be interesting to know how much you pay to have your regulators serviced (primary, secondary and octi).

Regulator has been freshly serviced and has a brand new Legend LX 2nd Stage! Free shipping in the US!

Hey all, Looking to get some advice on regulators. Got my open water cert this February and once the lockdown is over, I plan to go diving 2-3 times a month. I’ve picked up an X-Tek backplate and wing, and am now looking for a computer and a regulator. I’m looking to get a solid set of gear...

Hello, Please forgive me if this post should be in another area; I believe this is a general regulator question in the appropriate subcategory. Does anyone know of which currently made model from Scubapro, both 1st and 2nd stage are easiest to repair for a DIY user? From my research, this...