Aftermarket Filter tower for compressor!

[miker-gr]

Hello!
Recently i was given from a friend a 22 years old portable compressor from a Greek company named Paramina. (PARAMINA | Mistral 6-8 Series)
The compressor's model is mistral, a 3 stage air cooled, 100ltr/min. I believe is very similar to bauer junior!
The compressor needs a new filter tower and i guess a few other parts!
Any place where i can get a new filter tower? In the EU please!

 

[SurfLung]

There are quite a few of them listed on Ebay. The Chinese ones are hard to tell if acceptable for breathing air but there are a couple from Coltri Sub and a few others that might suit your purpose.
scuba compressor filter | eBay

 

[miker-gr]

i have seen the Chinese but i don't trust them! I want a retail shop! Not ebay!

 

[Crystal Enterprise]

if you intrested to buy from india contact me on whatsapp or call +91 7405678256

 

[miker-gr]

if you intrested to buy from india contact me on whatsapp or call +91 7405678256

Please use PM

 

[Miyaru]

Filter unit for breathing air compressor with filter cartridge

 

[rhwestfall]

Shelden Sporting Goods Inc. - High Pressure Air Compressors

(edit- oops, didn't see EU requirement... best to keep the link here in case someone else might be looking)

 

[rcontrera]

That filter system is more than just a filter tower. It is a combo moisture separator and filter housing like the Bauer. To replace it, you would need both a moisture separator and a filter housing as well as a pressure maintaining valve. Ian is in the UK and should be able to help put together a system for you.

 

[miker-gr]

That filter system is more than just a filter tower. It is a combo moisture separator and filter housing like the Bauer. To replace it, you would need both a moisture separator and a filter housing as well as a pressure maintaining valve. Ian is in the UK and should be able to help put together a system for you.

The compressor have a moisture separator between the 2 and 3 stage. This is in good shape and anyway is not taking too much stress! Its max pressure is less than 40 bar! The problem is the filter after the final (3 stage) that makes all the work!
There is no MPV but i am looking for one! Who is Ian? Any link?

 

[rcontrera]

It is still a combo moisture separator, filter housing and pressure maintaining valve so you will need all three. And if you don't know Ian, then you must be VERY new to this forum.