anyone have an oceanic pro plus ?

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Look at the instruction for battery replacement on page 88 of your operating manuel...it's a relatively simple change...4 phillips head screws and replace the 3 volt CR 2...you can normally find the batteries at Home Depo, Wal-Mart, Radio Shack or CVS......
good luck
 
What he said. Clean the o-ring and o-ring seat on the cover, put silicon grease on the o-ring (just enough to make it look wet), look at the o-ring through a magnifying glass after you install the o-ring back where it belongs. Then you look at the cover to make sure it doesn't have any debris on it and replace the cover. A hair or very small piece of dust/lint will cause the computer to flood.
 
If its a pro plus it needs a 3.6v battery the pro plus 2 use the 3v cr2 battery.
 
Right. The older Pro Plus used a kind of odd 3.6v 1/2AA Lithium battery. Not likely to find that at Wal-mart. "Batteries Plus" has them. Commonly used in garage door opener remotes.

-Charles
 
https://www.shearwater.com/products/peregrine/

Back
Top Bottom