• Welcome to ScubaBoard


  1. Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

    Benefits of registering include

    • Ability to post and comment on topics and discussions.
    • A Free photo gallery to share your dive photos with the world.
    • You can make this box go away

    Joining is quick and easy. Login or Register now by clicking on the button

Calypso IV

Discussion in 'Vintage Diving & Equipment' started by 70diver, May 30, 2021.

  1. 70diver

    70diver New

    # of Dives: 0 - 24
    Location: Jacksonville florida
    2
    0
    Hi every one I have just rebuilt a calypso IV 1st stg reg. I came to find out that it did not have a high pressure bushing when I disassembled it. Can anyone tell me where I can get one. And if the reg will work without one thanks dan
     
  2. GJC

    GJC Solo Diver

    # of Dives: 200 - 499
    Location: Southern California, USA
    657
    560
    Vintagedoublehose.com had them in the past but currently list them as out of stock. You may want to contact them to see if they anticipate having them available any time soon.

    The voluntary recall and bushing update occurred after 1 regulator failure. But the possible failure without that bushing results in shutting off gas so use without the bushing at your own risk.
     
  3. 70diver

    70diver New

    # of Dives: 0 - 24
    Location: Jacksonville florida
    2
    0
    Hi give. And thanks for the info. I have a spare air bottle and I was just going to use the calypso as a surface supply regulator for shallow diving. Thanks again. Dan
     

Share This Page