Controlling shutter speed with nautical housing-em511

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

MMM

Moderator
Staff member
ScubaBoard Supporter
Messages
11,875
Reaction score
4,817
Location
Sask. Canada/Cozumel, MX
# of dives
1000 - 2499
i apologize if this rather basic question has been asked before (by me perhaps even!) but if so I can't find the answer. I cannot find a dial on my Nauticam housing to set shutter speed (unless I go out of Manual and change the setting to S. Can someone tell me how I can shoot on Manual and (easily) adjust shutter speed?
 
Marge,

See the camera's instruction manual page 37 for setting aperture and shutter speed in Manual mode. I don't have the Mark II Nauticam housing. Is there an external control for the lever? If not, can you preset the lever before putting the camera in the housing?

Jim
 
Hi Jim. I have reviewed the manual again but the problem is that there is no external control on the Nauticam housing that I can see. Maybe I will try contacting Nauticam...
 
Wonderful. Nauticam makes great housings, with full access to all camera functions, so I was pretty sure there was a way to control both aperture and shutter speed in manual mode. When do you return to warm water or are you there?
 
Wonderful. Nauticam makes great housings, with full access to all camera functions, so I was pretty sure there was a way to control both aperture and shutter speed in manual mode. When do you return to warm water or are you there?
I have been here for 3 weeks already!
 
https://www.shearwater.com/products/peregrine/

Back
Top Bottom