brahma
Guest
Anyone have a solution for mounting a Suunto Transmitter to a Cyklon 5000?
Desperate for solution in mounting a Suunto Transmitter to a Cyklon 5000
- Thread starter brahma
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
What's the problem?
Is it an older metric first stage?
Is it an older metric first stage?
tadawson
Contributor
I don't think the 5000 was ever metric, at least not in the US . . . I think that is the point in time that they made the switch.
- Tim
- Tim
GillScales
Contributor
If the problem is having the ports too close together, you might try mounting the transmitter to a 6" hp hose. It's not a terribly elegant solution, but it should work I think.
Jorgen Nilsson
Registered
There is a "HP port extender" that I know other divers with the same issue has used. Check with your local Poseidon Dealer and I'm sure they can help you.
I had the same problem, like Jorgen said HP port extender. I used it with my oceanis transmitter, although it does make it stick out an extra 1/4".
Similar threads
